1.Install Autodesk 2014 Windows Products
2.Use as Serial 666-69696969, 667-98989898, 400-45454545 066-66666666 ..
or anything matching those templates
3.Use the Product Key matching.
The product Key can be find in a file called MID.txt (not always)
in the root of the iso or in the unpacked exe file.
It will look like this : Part Number: xxxF1-123456-123456...
What you want is the xxxF1 number. You may also get it after installing in Trial
and Activating within the application or Just by looking around :)
4.Finish the installation & restart Autodesk Product
ACTIVATION : We suggest blocking outgoing traffic (faster and easier to activate)
5.Before clicking on Activate
You have 2 options :
- a) Disable Your network Card, pull the network cable out or block with firewall
(this is just to disable online checks) it will tell you that an internet Connection is
Required
simply click on close and click on activate again
OR
- b) Click on Activate and it will do an online check, simply click
on close and click on activate again.
Choose option a or b.
6. Select I have an activation code from Autodesk
7.Once at the activation screen:
start XFORCE Keygen 32bits version or 64bits version
8.Click on Mem Patch (you should see successfully patched)
9.Copy the request code into the keygen and press generate
10.Now copy the activation code back to the activation screen and click Next
You have a fully registered autodesk product
NB: Make sure you are running the Keygen as administrator and with UAC off on
Windows7/8