Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

Z Endorsement (Air Brakes) Practice Test | 100% Correct Answers | Verified | Latest 2024, Exams of Engineering

Breaks convert the energy of a moving vehicle into ________________________ that is developed by friction between fixed and moving brake parts. - ✔✔Heat Hydraulic brake systems are filled with _____________________________ that cannot be compressed. - ✔✔Brake fluid Compressed air mass travel from one component to another In the system so there are split second ______________________________ in break reactions. - ✔✔Delays Drivers must avoid being ___________________________ Of any exhausting compressed air. - ✔✔Direct path Air compressors force air into a ___________________________ space. - ✔✔Smaller Air compressors for power directly by the engine or are powered by using _________________________ and _____________________________. - ✔✔Belts , Pulleys The ________________________ pressure setting is the point where the compressor stops pumping air. - ✔✔Cut out The _________________________ pressure setting is the point where the compressor s

Typology: Exams

2023/2024

Available from 09/05/2024

BESTOFLUCK
BESTOFLUCK 🇺🇸

4.2

(5)

2.1K documents

1 / 6

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
Z Endorsement (Air Brakes) Practice
Test | 100% Correct Answers | Verified |
Latest 2024 Version
Breaks convert the energy of a moving vehicle into ________________________ that is developed by
friction between fixed and moving brake parts. - ✔✔Heat
Hydraulic brake systems are filled with _____________________________ that cannot be compressed. -
✔✔Brake fluid
Compressed air mass travel from one component to another In the system so there are split second
______________________________ in break reactions. - ✔✔Delays
Drivers must avoid being ___________________________ Of any exhausting compressed air. - ✔✔Direct
path
Air compressors force air into a ___________________________ space. - ✔✔Smaller
Air compressors for power directly by the engine or are powered by using _________________________
and _____________________________. - ✔✔Belts , Pulleys
The ________________________ pressure setting is the point where the compressor stops pumping air.
- ✔✔Cut out
The _________________________ pressure setting is the point where the compressor starts pumping
air. - ✔✔Cut in
The operating pressure range for air brake systems must be between ________________ And
____________________. - ✔✔80 PSI , 100 PSI
pf3
pf4
pf5

Partial preview of the text

Download Z Endorsement (Air Brakes) Practice Test | 100% Correct Answers | Verified | Latest 2024 and more Exams Engineering in PDF only on Docsity!

Z Endorsement (Air Brakes) Practice

Test | 100% Correct Answers | Verified |

Latest 2024 Version

Breaks convert the energy of a moving vehicle into ________________________ that is developed by friction between fixed and moving brake parts. - ✔✔Heat Hydraulic brake systems are filled with _____________________________ that cannot be compressed. - ✔✔Brake fluid Compressed air mass travel from one component to another In the system so there are split second ______________________________ in break reactions. - ✔✔Delays Drivers must avoid being ___________________________ Of any exhausting compressed air. - ✔✔Direct path Air compressors force air into a ___________________________ space. - ✔✔Smaller Air compressors for power directly by the engine or are powered by using _________________________ and _____________________________. - ✔✔Belts , Pulleys The ________________________ pressure setting is the point where the compressor stops pumping air.

  • ✔✔Cut out The _________________________ pressure setting is the point where the compressor starts pumping air. - ✔✔Cut in The operating pressure range for air brake systems must be between ________________ And ____________________. - ✔✔80 PSI , 100 PSI

The air brake system supply tank is also called a _____________________________ tank. - ✔✔Wet To ensure that excessive moisture is not held up in the air brake system, the air tanks must be ___________________________ on regular basis. - ✔✔Drained Vehicle manufacturers recommend the air tanks be drained on a __________________________ basis. - ✔✔Daily Air pressure gauges are provided to show the air pressure in the _______________________ And _______________________ air tanks. - ✔✔Primary , Secondary To protect from damage (that could be caused by over-pressure), air brake systems are fitted with ________________________ Valves. - ✔✔Safety To morning driver the air pressure is dangerously low, Vehicles are fitted with __________________________ Warning devices. - ✔✔Low air pressure When an air dryer cycles, there is a noticeable discharge of air exhaust port coincides with compressor __________________________. - ✔✔Cut out Alcohol and operators are optional devices that add alcohol Vapour to the air system to help (avoid ___________________________ of moisture in the air brake system.) - ✔✔Freezing Limiting the application pressured to the front steering axle brakes of the vehicle reduce the chance __________________________. - ✔✔Wheel lock When the air loss rate Is higher then is permitted, The air brake system has _________________________________. - ✔✔Air leaks (3,4,6 PSI) Stroking of a break chamber is the result of _____________________________ entering the chamber. - ✔✔Compressed air.

Cross trailer connections will result in brake system _____________________________. - ✔✔Malfunction In the event of a loss of the trailer service air and a "spring break priority" System, the only way to apply trailer brakes is by use of the trailer ___________________________. - ✔✔Supply valve True or False?!?!?! The protection valve used on towing vehicles prevent loss of air from the trailer service line. - ✔✔True 's' CamAir brakes have _______________________ pushrods. - ✔✔Exposed 's' Cam airbrake use brake ________________ and _________________. - ✔✔Drums and shoes Air disc brake systems use _________________ and ________________. - ✔✔Rotors and calipers Wedge air brake systems use drumming brake chambers facing _____________________. - ✔✔Inward The demands of the vehicles brake system ______________________ as the vehicle speed or weight increases. - ✔✔Increase Vehicles can be overloaded to the point that the vehicles ___________________________ Is exceeded. - ✔✔Braking ability The brakes are used frequently or severely, more ____________________________ Is developed. - ✔✔Brake heat Break fade is a drop in brake force that might be noticed when brakes get _____________. - ✔✔Hot Improper break-adjustment will reduce the effectiveness of the service and _______________ brakes. - ✔✔Spring

When a vehicles wheel locks, the driver loses __________________. - ✔✔Steering control Antilock brake systems (ABS) Should not be expected to shorten a vehicles __________________________ distance. - ✔✔Stopping To indicate the status of a antilock brake system ____________________________ are used. - ✔✔Indicator lights Vehicles that do not comply with the applicable Safety regulations are subject to _____________________. - ✔✔Penalties When vehicles are found to have Defects, The carrier, and then __________________________ can be charged. - ✔✔Driver To perform vehicle inspection safely, drivers must consider where the vehicle is ____________________.

  • ✔✔Parked Unexpected movements of the vehicle during an inspection can be avoided by using wheel ________________________________. - ✔✔Chocks or blocks An inspection of the vehicles air tanks include looking for evidence of? - ✔✔Insecure mounting An inspection of the vehicles air compressor includes looking for evidence of? - ✔✔Please Compressor,Loose, cut or frayed compressor drive belts, and secure air compressor mine, brackets or fasteners. And Inspection of the vehicles air brake chambers include looking for evidence of? - ✔✔Audible air leaks, cracks and non-manufactured holes, mismatch sizes and/or slack adjusters length on steer axles. A vehicle passes the low air warning device test when? - ✔✔Pressure is at or above 55 psi.