Study with the several resources on Docsity
Earn points by helping other students or get them with a premium plan
Prepare for your exams
Study with the several resources on Docsity
Earn points to download
Earn points by helping other students or get them with a premium plan
Community
Ask the community for help and clear up your study doubts
Discover the best universities in your country according to Docsity users
Free resources
Download our free guides on studying techniques, anxiety management strategies, and thesis advice from Docsity tutors
A series of multiple-choice questions and answers related to the construction of steel decks. It covers various aspects of steel deck installation, including types of decks, attachment methods, safety procedures, and weight limitations. Useful for students and professionals seeking to understand the practical aspects of steel deck construction.
Typology: Exams
1 / 18
This page cannot be seen from the preview
Don't miss anything!
_____ must be tightly connected to prevent opening during concrete pouring.
A. Soft spots B. Floor deck C. Concrete D. Side laps - โ โ D. Side laps
_____ steel deck would have a designation of 3" x 8" (DR)?
A. Roof B. Composite C. Form
D. Cellular - โ โ A. Roof
______ is responsible to provide fall protection during deck erecting operations.
A. The employer B. The customer C. The foreman D. The inspector - โ โ A. The employer
_____ deck can be used to provide a chase for electrical distribution.
A. Composite B. Roof C. Form D. Cellular - โ โ D. Cellular
Which of the following types of deck would have a designation 1-1/2 x 6 (WR)?
B. Roof C. Form D. Cellular - โ โ D. Cellular
Which of the following types of deck would have a designation 1-1/2 x 6 (WR)?
A. Roof B. High profile C. Low profile D. Form - โ โ A. Roof
Which one of the following is not a proper method to attach steel decking?
A. Air/Power driven fasteners B. Self drilling screws C. Welding
D. Adhesive - โ โ D. Adhesive
1-1/2" x 6" composite floor deck has a weight range of _____.
A. 2 psf - 4 psf B. 2 psf - 5 psf C. 2 psf - 7 psf D. None of the above - โ โ B. 2 psf - 5 psf
A ____ should be used at reasonable intervals to assure proper alignment of deck panels.
A. Story pole B. Snap chalk line C. Ley line D. Guideline - โ โ B. Snap chalk line
A working area at least _____ feet wide should be established around or along each bundle so that the bundle can safely be accessed.
A. 20 B. 15 C. 12 D. 10 - โ โ C. 12
Bundles should always be hoisted by the strapping and should always be placed tag side up.
A. True B. False - โ โ B. False
Cellular deck is always furnished galvanized or phosphatized.
A. True B. False - โ โ B. False
Deck bundle weight is limited to a maximum of _____ pounds for deck to be applied to joists.
A. 5, B. 4, C. 4, D. 3,000 - โ โ C. 4,
Deck is typically attached to the building frame with all of the following except:
Form deck finishes are typically furnished _____.
A. Uncoated B. Prime painted C. Galvanized D. All of the above - โ โ D. All of the above
Roof deck can be butted (or lapped more than 2") to solve field fit problems.
A. True B. False - โ โ A. True
Roof deck is typically installed to end lap approximately _____ inches over supports.
A. 6 B. 4 C. 2 D. 2-1/2 - โ โ C. 2
Roof deck is typically installed to end lap approximately _____ over supports.
A. 1" B. 1.5"
The standard maximum bundle weight for steel decking is _____ pounds.
A. 1000 B. 2000 C. 3000 D. 4000 - โ โ D. 4000
Weld washers are not recommended for deck thicknesses of _____ inches thick and greater.
A. 0. B. 0.
The maximum size penetration that can be made in roof deck without the need of reinforcing is _____.
A. 4" B. 6" C. 8" D. 10" - โ โ B. 6"
Weld washers are recommended for metal thickness less than _____ gage.
A. 20 B. 22
Welding side laps is not recommended for deck type _____ gage or lighter.
A. 24 B. 22 C. 20 D. 18 - โ โ B. 22
When attaching steel deck with a side lap connection, a good weld will have _____ or more of its perimeter working.
A. 7/ B. 1/ C. 1-1/ D. 9/8 - โ โ A. 7/
When placing deck, workers should maintain a safe distance of about _____ feet from the end of the deck unit.
A. 20 B. 16 C. 12 D. 6 - โ โ D. 6
When placing steel deck. Workers should maintain a safe distance of _____ feet from the end of the deck unit.
A. 2 B. 4 C. 6 D. 8 - โ โ C. 6
