Download Rope Rescue Technician Exam 2025 – Complete Q&A Study Guide (Verified Questions & Answers and more Exams Health sciences in PDF only on Docsity!
ROPE RESCUE TECHNICIAN EXAM 2025
Complete Q&A Study Guide (Verified
Questions & Answers)
The NFPA standard number for fire service Life Safety Rope and System components is - CORRECT ANSWER 1983 Which NFPA standard covers operations and training for technical search and rescue incidents - CORRECT ANSWER 1670 What type if knot could be used to make a litter attendant tie-in adjustable in the low angle environment - CORRECT ANSWER Prusik Hitch Life safety ropes are manufactured using ______ construction - CORRECT ANSWER Block Creel The kern of a kernmantle rope is its - CORRECT ANSWER Core Nylon rope, type 6.6, has a melting temperature of about - CORRECT ANSWER 480 deg. fahrenheit An acceptable method of storing rope is in - CORRECT ANSWER a cool, dry area Which is an element of a knot - CORRECT ANSWER bight
the ____ hitch is a friction hitch that can be used for rappelling as a last resort - CORRECT ANSWER munter one of the most common ways a rope's life is shortened is through - CORRECT ANSWER Abrasion the knot configuration depicted below is called a - CORRECT ANSWER double fisherman's knot/bend the configuration depicted below is called a ____ and is used to tie webbing together - CORRECT ANSWER water knot what is used as a stopper knot - CORRECT ANSWER figure 8 a knot that is tied around an object in such a way that, when the object is removed, it falls apart is a(n) - CORRECT ANSWER hitch small diameter rope used to make a prusik loop is called - CORRECT ANSWER accessory cord the open loop is a rope formed when it is doubled back on itself is called a - CORRECT ANSWER bight the preferred construction method due to the strands spiraling around the web in tubular webbing is - CORRECT ANSWER shuttle loom rope constructed so that the fibers run the entire length of the rope without splices is called - CORRECT ANSWER block creel according to NFPA 1983, the minimum tensile test strength of a
(Percentage) - CORRECT ANSWER 100% kernmantle rope is the most used for rescue with the kern member providing _____ of the rope's strength - CORRECT ANSWER 7585% what type of knot could be used to make a litter attendant tie-in adjustable in the low angle environment - CORRECT ANSWER prusik hitch when wet, the loss in strength for polyester rope is - CORRECT ANSWER minimal which is an element of a knot - CORRECT ANSWER bight the ____ hitch is a friction hitch that can be used for rappelling as a last resort - CORRECT ANSWER munter the term ____ is a classification for life safety rope - CORRECT ANSWER static some dynamic kernmantle ropes can stretch as much as _____ percent before breaking - CORRECT ANSWER 60 as defined in NFPA 1983, 2012 edition, the minimum breaking strength for new technical/light use life safety rope shall not be less than _____ Lbf when tested - CORRECT ANSWER 4500 the _____ knot is primarily used as a safety knot - CORRECT
ANSWER overhand one knot that may be used to tie two pieces of rope together is the _____ - CORRECT ANSWER figure 8 bend when operating a Munter hitch, the ____ must not be taken off the rope - CORRECT ANSWER brake hand the sheath rating of a kernmantle rope is ____ percent of the rope's strength - CORRECT ANSWER 10 - 30 _____ is related to the amount a rope can safely elongate - CORRECT ANSWER energy absorption nylon rescue ropes lose up to _____ percent of their strength when wet - CORRECT ANSWER 23 a function of a load releasing hitch is to allow ____ but it also works great as a load-transfer component when passing knots in very long systems - CORRECT ANSWER releasing jammed prusiks the strongest knot for attaching to an anchor is the - CORRECT ANSWER tensionless hitch the hitch used for ascending a rope and for assistance in self-rescue situations is the____ - CORRECT ANSWER prussik The knot used as a self-rescue knot is the - CORRECT ANSWER prussik hitch
which statement is correct regarding rope diameter - CORRECT ANSWER larger diameter ropes provide more friction the sheath rating of a kernmantle rope is _____ percent of the rope's strength - CORRECT ANSWER 70 - 90 the breaking strength of a rope is measured as - CORRECT ANSWER tensile strength at break nylon rope has - CORRECT ANSWER high strength, high resistance to abrasion the hunter hitch is intended for a - CORRECT ANSWER one person load the maximum elongation of static kernmantle rope is _____ percent - CORRECT ANSWER 6 standard webbing color indicates that green webbing is - CORRECT ANSWER 5 feet long what is commonly used for strapping materials in securing the victim in the litter - CORRECT ANSWER 1" tubular webbing carabiner parts - CORRECT ANSWER latch, locking nut/collar, hinge, spine general use carabiners shall withstand a minimum test load of
approximately 9,000 lbF which equals approximately ____ kN - CORRECT ANSWER 40 40kN is approximately equivalent to ____ lbF - CORRECT ANSWER 9,0 00 Anchor points tied off separately and then connected to a common point are called - CORRECT ANSWER load sharing a type of pulley that is used in conjunction with prussic belay systems is a - CORRECT ANSWER prussic minding The load applied to a carabiner should be applied to the - CORRECT ANSWER spine general use carabiners should be tested to a rated strength of approximately ______ lbF - CORRECT ANSWER 9, A double pulley has a center plate, and the extension off the center plate for a carabiner attachment is called the - CORRECT ANSWER Becket which is a cording configuration that can be used as a rope grab for rigging purposes - CORRECT ANSWER prussik hitch what is used to connect other pieces of equipment and is usually made from steel or aluminum - CORRECT ANSWER carabiners pulley size is determined by the diameter of the - CORRECT ANSWER sheave
which is a means of providing edge protection and reduces friction for a rappel rope - CORRECT ANSWER edge rollers which is a means of reducing edge friction for high angle rescue rope - CORRECT ANSWER installing edge rollers as the load on a pulley bearing is increased, its friction coefficient ____ - CORRECT ANSWER increases which statement concerning the use of Progress Capture Devices (PCD's) in a low angle hauling operation is true - CORRECT ANSWER PCDs can be either hard cams or soft cams which is a characteristic of the body positions assumed by litter tenders during a low angle evacuation - CORRECT ANSWER Tenders allow the rope system to determine the litter's rate of descent or ascent which statement regarding litter rigging for low angle evacuation is true - CORRECT ANSWER for a more stable tie-in, start the wrap of the litter rail with a clove hitch and end it with a second clove hitch on the opposite side a metal device that, through friction with the rope, creates a braking action for a controlled rappel is called a(n) - CORRECT ANSWER descent control device a descent control device that allows for adjustable friction by sliding bars together is a - CORRECT ANSWER brake bar rack
the severity of a falll that is expressed as a ratio calculated by dividing the distance fallen by the length of the rope used to arrest the fall is called the - CORRECT ANSWER fall factor when tying off with a brake bar rack, how many of the bars should be used or engaged on the rappel rack - CORRECT ANSWER 6 when possible, ______ separate anchor sites should be employed to assure a safe and redundant rope rescue system - CORRECT ANSWER 2 a multipoint anchor system is preferred when the _____ of the load will be changing - CORRECT ANSWER direction a method of unlocking a struck carabiner gate lock is to - CORRECT ANSWER wrap cordage of webbing around the gate lock and use as a strap wrench when tying to an anchor point, in order to reduce the leverage on that point you should attach to the ____ - CORRECT ANSWER lowest point available the anchor point that a load will be dependent upon is called the _____ anchor - CORRECT ANSWER primary/bombproof at what interior angle within an anchor system does the load equal 100% on each leg of the anchor - CORRECT ANSWER 120 deg
which type of litter should only be used for disaster work or mass casualties - CORRECT ANSWER light eight litters with flat metal straps how many points of attachment to the litter are used in the fabrication of a single line lowering bridle for a Stokes basket - CORRECT ANSWER 4 Which descent device allows friction to be increased or decreased during a rope rescue while under a load - CORRECT ANSWER a brake bar rack when engineering basic lowering systems, a simple anchor - CORRECT ANSWER takes no longer to set up and can use less gear than an anchor system when utilizing two anchor points at an angle of 90 deg with a 100lbload, the amount of weight on each anchor point is approximately ____ lbs - CORRECT ANSWER 70 In single change of direction force vectors, the most force you can generate at the point of the angle is ______ the load - CORRECT ANSWER two times In change of the direction components, the _____ the angle created by the force vector, the _______ the force added to the system - CORRECT ANSWER wider, less
in shared-anchor systems, the _____ the angle created by the force vector, the ______ the force is on the anchors - CORRECT ANSWER narrower, less when two anchor points are used to support a load, an angle is created by the anchor straps. as the angle becomes ______ the force on the anchors will _____ - CORRECT ANSWER Greater, increase A device used to reduce friction during directional changes in a. rescue system is a - CORRECT ANSWER pulley it is permissible to use a brake bar rack with _____ bar(s) while rappelling during a rescue if the victim is a child or person weighing approximately 75 lbs or less - CORRECT ANSWER 4 unless your descent control device is safely locked off, never let go of the rope with your ____ when rappelling - CORRECT ANSWER control hand when tying the victim in a basket, one-inch _____ webbing works well. it is _____ providing patient comfort - CORRECT ANSWER Tubular, pliable when using a litter basket, the method used to lower the basket either horizontally or vertically is determined by the - CORRECT ANSWER location from which the rescue will take place when using a litter basket, the method to lower horizontally or vertically is determined by the - CORRECT ANSWER size of the opening
A triangular screw link is designed to perform best under _____ directional pulls - CORRECT ANSWER 3 if a right-handed person is rappelling with a brake bar rack, the left hand slides the bars - CORRECT ANSWER together to slow descent when directing the team with a load-distributing anchor system you should - CORRECT ANSWER use the one-foot rule, keeping each leg less than 12 inches by connecting the marginal anchor point to a bombproof anchor point behind it with a ____, the marginal anchor becomes the focal point - CORRECT ANSWER pretensioned back-tie when possible, ____ separate anchor sites should be employed to assure a safe and redundant rope rescue system - CORRECT ANSWER 2 when setting up a contingency anchor system, you need to have - CORRECT ANSWER twice as much rope when directing your team that is using an anchor with a change of direction greater than 180 deg (interior angle of 0 deg) remember the force placed on the anchor will be.... - CORRECT ANSWER twice the load on the system when constructing an anchor system so the load will be evenly spread, you should use the .... - CORRECT ANSWER redundant double loop
what other equipment should the first rescuer have to climb a tower besides wearing a harness and having a radio - CORRECT ANSWER a small diameter rope or drop line a clutch has a center plate and the extension off the center plate for a carabiner attachment is the ___ - CORRECT ANSWER becket a litter basket requires _____ main lines to accommodate a horizontal lower with two attendants - CORRECT ANSWER 2 when using a CLUTCH for ascending.... - CORRECT ANSWER add a rope grab with a foot loop above the CLUTCH. when using a CLUTCH lowering system, you should.... - CORRECT ANSWER first load and test the CLUTCH to confirm proper operation When using the brake bar for descending, you should - CORRECT ANSWER rig the short leg of the rack toward your brake hand so the rope can be moved right or left when removing bars. which is a trait of an effective leader during rope rescue situations - CORRECT ANSWER flexibility 3 standards that have an influence on rope rescue equipment, training, and/or operations - CORRECT ANSWER NFPA 1670, NFPA 1006, and NFPA 1983 the highest priority for all rescue personnel during rescue operations is
span of control is an incident management term meaning the ... - CORRECT ANSWER number of people that can efficiently and safely be managed and continuously accounted for by a supervisor a critical piece of personal protective equipment for the technical rescuer's ensemble is.... - CORRECT ANSWER a protective helmet one of the key safety items is to... - CORRECT ANSWER establish a well-marked safety perimeter using flagging or chalk line a major concern for the rescue scene incident commander regarding personnel accountability is to establish... - CORRECT ANSWER a personnel reporting system a(n) ____ is an organized system of roles, responsibilities, and standard operating procedures used to manage and direct emergency operations - CORRECT ANSWER incident command system which functional area of an incident management system is responsible for the collection, evaluation, dissemination, and use of information concerning the incident - CORRECT ANSWER incident officer which is a characteristic of a helicopter classified as Medium (type 2) under the National Interagency Incident Management System - CORRECT ANSWER has an allowable payload at 59 deg. F at sea level of 2,500lbs the critical incident stress debriefing should be... - CORRECT ANSWER required of all rescue and other personnel that deal with an extreme incident
what are the unique features of low angle evacuation - CORRECT ANSWER the litter is supported by the litter tenders and a rope rescue system a class III harness.... - CORRECT ANSWER is a full body harness the minimum safe distance from a power line with live voltage phase to phase of 750 to 1000 is.... - CORRECT ANSWER 45 feet when preplanning for tower rescue, contact and resource information should be included for all of the carriers on that tower as well as..... - CORRECT ANSWER lockout tag out rescuers operating the progress capture device used on low angle evacuation hauling systems should see that the load ______ when the pulling force is released - CORRECT ANSWER will not release which is an optional addition to the low angle evacuation litter team - CORRECT ANSWER medical attendant where do tenders tie into on low angle evacuations - CORRECT ANSWER directly to the litter the simplest tie-in used as a low angle evacuation litter tender is a - CORRECT ANSWER manufactured adjustable loop A class I harness... - CORRECT ANSWER fits around the waist and thighs for one person when rappelling, what is occurring? - CORRECT ANSWER the brake device moves and the rope remains stationary
