Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

Residential Electrical Services: Questions and Answers, Exams of Electrical Engineering

A series of questions and answers related to residential electrical services, covering topics such as gfci protection, cable types, circuit requirements, grounding, and nec code sections. it's valuable for students learning about electrical installations and code compliance, providing a practical assessment of their understanding. The questions test knowledge of various aspects of residential electrical systems and their adherence to the national electrical code (nec).

Typology: Exams

2024/2025

Available from 04/21/2025

tizian-kylan
tizian-kylan 🇺🇸

2.7

(21)

3.8K documents

1 / 6

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
Residential Electrical Services
Questions and Answers Already Passed
Which of that following locations at dwelling units require GFCI protection? ✔✔Receptacles
within gaarages
Which type of cable with a corrugated sheath has a maximum bend raduis of 7 times the cable
diameter? ✔✔Type MC
Which of the following circuits require a minimum of 20A of overcurrent protection?
✔✔Residential small appliance branch circuits
According to the NEC, which of the following is required for the small appliance loads in each
kitchen area? ✔✔Two 120V, 20A small appliance branch circuits
According to NEC Section 220.53, loads for which of the following appliances shall be
permissible to apply a demand factor of 75%? ✔✔Fixed appliances
The NEC allows the load calculation for the ground neutral conductor supplying electric ranges
and dryers to have a demand factor of ______. ✔✔70%
pf3
pf4
pf5

Partial preview of the text

Download Residential Electrical Services: Questions and Answers and more Exams Electrical Engineering in PDF only on Docsity!

Residential Electrical Services

Questions and Answers Already Passed

Which of that following locations at dwelling units require GFCI protection? ✔✔Receptacles within gaarages

Which type of cable with a corrugated sheath has a maximum bend raduis of 7 times the cable diameter? ✔✔Type MC

Which of the following circuits require a minimum of 20A of overcurrent protection? ✔✔Residential small appliance branch circuits

According to the NEC, which of the following is required for the small appliance loads in each kitchen area? ✔✔Two 120V, 20A small appliance branch circuits

According to NEC Section 220.53, loads for which of the following appliances shall be permissible to apply a demand factor of 75%? ✔✔Fixed appliances

The NEC allows the load calculation for the ground neutral conductor supplying electric ranges and dryers to have a demand factor of ______. ✔✔70%

Which of the following is required to carry the lighting load for the residence in the figure above? ✔✔Two 15A circuits

How many square feet of livable space are in the home in figure above? ✔✔1,

Which of the following is the minimum NEC lighting load requirement for the home in the figure above? ✔✔3,600VA

Which of the following is an NEC-approved grounding electrode? ✔✔Metal underground water pipe in direct contact with the earth for 10 feet

The minimum clearance of service drop conductors over a residential driveway is reduced to 12 feet when the voltage is limited to ________. ✔✔300V to ground

The section of the NEC that lists the requirements for installing service disconnecting means is ______. ✔✔NEC Section 230.

Romex is a trade name for _____. ✔✔Type NM cable

Which section of the NEC covers the installation of pools and spas? ✔✔NEC Section 680

A GFCI sensor will trip when the ____. ✔✔current in the neutral load is less than the current in the hot load.

Listed FMC may be used as an equipment grounding conductor if the circuit conductors are protected by overcurrent devices rated at ______ ✔✔20A or less

Which section of the NEC covers equipment grounding and equipment grounding conductors? ✔✔NEC Section 250

One of the advantages of electric heat is that ______. ✔✔Initial installation costs are less than other types of systems

Any outlet that supplies power to a hot tub shall be _______. ✔✔GFCI protected

The conductors that extend from the panelboard to various outlets are called _____. ✔✔branch circuits

Exposed noncurremt-carrying metal parts of fixed equipment must be grounded if the equipment operates with any terminal over_____. ✔✔150V to ground

Conductors used for electric heating units must be sized for what percentage of the heater's nameplate rating? ✔✔125%

In a residential pool area, receptacles ______. ✔✔must be at least 6 feet from the inside walls of the pool

A grounding electrode conductor must be ______. ✔✔made of copper, aluminum, or copper- clad aluminum

An electric heat pump is a type of HVAC system that _____. ✔✔furnishes more energy than it consumes

Power to the entire residence is shut of at the main service disconnect located _______. ✔✔at the panelboard

at the service drop