Download PLA Magnetic Iron Ficha Seguridad and more Study Guides, Projects, Research Advanced Machining Processes in PDF only on Docsity!
PROTO-PASTA MAGNETIC IRON PLA PRINT DATE: 04/25/
REV DATE:
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: Proto-pasta Magnetic Iron PLA SYNONYMS: Proto-pasta FEPLA PRODUCT CODES: FEP1XXXX
RECOMMENDED USE: For use in 3D printers at recommended temperatures
MANUFACTURER: Proto Plant ADDRESS: 5601 East 18Th Street # Vancouver, WA 98661
EMERGENCY PHONE: 503-877-
OTHER CALLS: 503-877-
HOMEPAGE: www.protoplant.com
CONTACTS: Dustin Cram – Chief Engineer dustin@protoplant.com
SECTION 2: HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW:
This is a polymeric compound. All ingredients are encapsulated by the polymer and present no likelihood of exposure under normal conditions of processing and handling. Dust may be generated during polishing, sanding, or machining. Appropriate PPE must be worn for these activities..
GHS-US CLASSIFICATION: NONE
SIGNAL WORD: NONE
HAZARD STATEMENT: NONE
LABEL ELEMENTS: NONE
PRECAUTIONARY STATEMENT: NONE
HAZARDS THAT DO NOT RESULT IN CLASSIFICATION
EYES: Solid/dust may cause irritation due to mechanical action. Dust will not be generated under normal use conditions.
SKIN: Filament is not likely to cause irritation. Contact with molten material may cause thermal burns.
BURNS: Molten material will cause thermal burns, avoid contact. INHALATION: Processing fumes may cause irritation to the respiratory tract, use in well ventilated areas only.
CHRONIC HEALTH HAZARDS: None known for this compound.
PROTO-PASTA MAGNETIC IRON PLA PRINT DATE: 04/25/
REV DATE:
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
INGREDIENTS CAS NO. % WT________________
Polylactide resin 9051-89-2 55 Iron 7439-89-6 43-
SECTION 4: FIRST AID MEASURES
EYES:
First Aid not likely required. Flush with water. Consult physician if symptoms persist.
SKIN:
Wash with soap and water. For thermal burns, immediately flush with cold water. Do not attempt to remove polymer from skin. Obtain medical attention.
INGESTION:
Obtain immediate medical attention. For a poison emergency in the U.S. call 1-800-222-1222.
INHALATION:
Leave exposed area and seek fresh air. If irritation persists, seek medical attention. When generating dust or processing use appropriate ventilation and protective equipment.
NOTES TO PHYSICIANS OR FIRST AID PROVIDERS:
Treat symptomatically.
SECTION 5: FIRE-FIGHTING MEASURES
FLAMMABILITY CLASS: 1
EXTINGUISHING MEDIA:
Foam. Water. Carbon Dioxide (CO2). Dry Chemical. Alcohol resistant foams are preferred if available. General purpose synthetic foams (including AFFF) or protein foams may function, but much less effectively.
UNSUITABL EXTINGUISHING MEDIA:
None Known
SPECIAL FIREFIGHTING PROCEDURES:
Persons exposed to products of combustion should wear NIOSH approved self contained breathing apparatus and full protective equipment.
UNUSUAL FIRE & EXPLOSION HAZARDS:
This compound has no unusual fire or explosion hazards.
SECTION 6: ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS:
Sweep up scrap and store material neatly to prevent slipping hazard.
PROTO-PASTA MAGNETIC IRON PLA PRINT DATE: 04/25/
REV DATE:
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE: Dark gray, textured/rough, thin strand
ODOR: Light sweet odor during processing, no odor at room temperature
ODOR THRESHOLD: Not determined
pH: Not Applicable
MELTING RANGE: 150C-180C
BOILING POINT/RANGE: Not applicable
FLASH POINT: Not Determined
EVAPORATION RATE: Not determined
FLAMMABILITY: Combustible if heated
UPPER/LOWER FLAMMABILITY OR EXPLOSIVE LIMITS: Not Determined
VAPOR PRESSURE: Not Determined
VAPOR DENSITY: Not Determined
DENSITY: 2 g/cc
WATER SOLUBILITY: Insoluble
SOLUBILITY IN OTHER SOLVENTS: Not determined
PARTITION COEFFICIENT: N-OCTANOL/WATER: Not Determined
AUTO-IGNITION TEMPERATURE: 300C-400C
DECOMPOSITION TEMPERATURE: 482F (250C)
VISCOSITY: Not applicable
SECTION 10: STABILITY AND REACTIVITY
REACTIVITY: Stable when stored as recommended
CONDITIONS TO AVOID: Temperatures above 446F (230 °C).
MATERIALS TO AVOID: Oxidizing agents. Strong bases.
HAZARDOUS DECOMPOSITION PRODUCTS: Burning produces obnoxious and toxic fumes. Aldehydes. Carbon monoxide (CO). carbon dioxide (CO2).
PROTO-PASTA MAGNETIC IRON PLA PRINT DATE: 04/25/
REV DATE:
Polymerization: Not applicable
SECTION 11: TOXICOLOGICAL INFORMATION
PRINCIPLE ROUTES OF EXPOSURE: Eye contact, Skin contact, Inhalation, Ingestion.
ACCUTE TOXICITY: None Known
SKIN CORROSION/IRRITATION: Contact with dust/fumes may cause irritation
SERIONS EYE DAMAGE/IRRITATION: Contact with dust/fumes may cause irritation
RESPIRATORTY OR SKIN SENSITIZATION: None Known
GERM CELL MUTAGENICITY: Not Determined
CARCINOGENICITY: Not Determined
REPRODUCTIVE TOXICITY: Not Determined
STOT-SINGLE EXPOSURE: Not Determined
STOT-SINGLE EXPOSURE: Not Determined
ASPITIATION HAZARD: Not Determined
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICITY EFFECTS: Not Determined
DEGRADABILITY AND PERSISTENCE: Not Determined
BIOACCUMULATIVE POTENTIAL: Not Determined
MOBILITY IN SOIL: Not Determined
SECTION 13: DISPOSAL CONSIDERATIONS
WASTE DISPOSAL METHOD: In accordance with local and national regulations. Do not contaminate ponds, waterways or ditches with chemical or used container. For recycling, contact local waste disposal centers.
SECTION 14: TRANSPORT INFORMATION
SECTION 14 NOTES: Not regulated under the US Department of Transportation.
