Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

OSHA 510 Exam 2024 Questions and Answers 100% Correct, Exams of Workplace Safety

OSHA 510 Exam 2024 Questions and Answers 100% Correct OSHA 510 Exam 2024 Questions and Answers 100% Correct OSHA 510 Exam 2024 Questions and Answers 100% Correct OSHA stands for - ANSWER-Occupational Safety and Health Administration OSHA's focus four injuries are: - ANSWER-1. fall 2. caught-in 3. struck by 4. electrical OSHA's mission is to _____ and _____. - ANSWER-save lives and prevent injuries

Typology: Exams

2023/2024

Available from 07/08/2024

BestGrades
BestGrades 🇺🇸

4.1

(25)

2.5K documents

1 / 8

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
OSHA 510 Exam 2024 Questions and
Answers 100% Correct
OSHA stands for - ANSWER-Occupational Safety and Health Administration
OSHA's focus four injuries are: - ANSWER-1. fall
2. caught-in
3. struck by
4. electrical
OSHA's mission is to _____ and _____. - ANSWER-save lives and prevent injuries
OSHA's primary method of enforcement of safety regulations is through _____. -
ANSWER-worksite inspections
OSHA was formed because _____ were increasing. - ANSWER-injuries and illnesses
OSHA was signed into law by President _____ in December of _____. - ANSWER-
Nixon; 1970
In the correct order, what is OSHA's inspection priority? - ANSWER-1. imminent danger
2. fatality or hospitalization
3. worker complaints/referrals
4. targeted inspections
5. follow-up inspection
The four types of OSHA citations and dollar amounts of fines are: - ANSWER-1. Willful
up to $134,937
2. Serious up to $13,494
3. Other-than-serious up to $13,494
4. Repeated up to $134,937
PPE stands for - ANSWER-Person Protective Equipment
The effects of workplace injuries and illnesses include - ANSWER-a. lower morale
b. increased costs to retain workers
c. slower production rates
d. higher turnover
e. increased worker's compensation rates
OSHA standards are found in the - ANSWER-title 29 labor CFR
Part _____ contains record keeping standards - ANSWER-1904
pf3
pf4
pf5
pf8

Partial preview of the text

Download OSHA 510 Exam 2024 Questions and Answers 100% Correct and more Exams Workplace Safety in PDF only on Docsity!

OSHA 510 Exam 2024 Questions and

Answers 100% Correct

OSHA stands for - ANSWER-Occupational Safety and Health Administration OSHA's focus four injuries are: - ANSWER-1. fall

  1. caught-in
  2. struck by
  3. electrical OSHA's mission is to _____ and _____. - ANSWER-save lives and prevent injuries OSHA's primary method of enforcement of safety regulations is through _____. - ANSWER-worksite inspections OSHA was formed because _____ were increasing. - ANSWER-injuries and illnesses OSHA was signed into law by President _____ in December of _____. - ANSWER- Nixon; 1970 In the correct order, what is OSHA's inspection priority? - ANSWER-1. imminent danger
  4. fatality or hospitalization
  5. worker complaints/referrals
  6. targeted inspections
  7. follow-up inspection The four types of OSHA citations and dollar amounts of fines are: - ANSWER-1. Willful up to $134,
  8. Serious up to $13,
  9. Other-than-serious up to $13,
  10. Repeated up to $134, PPE stands for - ANSWER-Person Protective Equipment The effects of workplace injuries and illnesses include - ANSWER-a. lower morale b. increased costs to retain workers c. slower production rates d. higher turnover e. increased worker's compensation rates OSHA standards are found in the - ANSWER-title 29 labor CFR Part _____ contains record keeping standards - ANSWER-

Part _____ contains general industry standards. - ANSWER- Part _____ contains construction industry standards. - ANSWER- A _____ standard applies to all industries. - ANSWER-horizontal A _____ standard applies only to certain industries. - ANSWER-vertical Direct costs are _____ quantified. - ANSWER-easily Direct costs are usually paid by submitting claims to ______ companies. - ANSWER- insurance An example of a direct cost is - ANSWER-a. medical cost b. physical therapy c. repair costs for damaged equipment d. continuation of pay e. administrative Indirect costs are _____ quantified. - ANSWER-not easily; difficult Indirect costs are usually paid by the _____. - ANSWER-company An example of indirect cost is - ANSWER-a. loss of efficiency by breakup of crew b. lost time by supervisor c. cost of breaking in new worker What is determined by the company's own record of accidents and losses? - ANSWER- Experience Modification Rate EMR equation - ANSWER-ACTUAL losses / EXPECTED losses OSHA defines an excavation as any __ cut, cavity, trench, or depression in the earth's surface formed by earth removal - ANSWER-man-made At trench is defined as a narrow underground excavation that is __ than it is wide - ANSWER-deeper A trench cannot be wider than - ANSWER-15 feet Cave-in protection is required for all excavations greater than - ANSWER-5 feet in depth unless they are entirely in sold stable rock A ladder must be provided every - ANSWER-25 feet for excavations greater than 4 feet in depth

Incident Rates allow for a comparative level of injuries and illnesses among different _____, _____, and _____. - ANSWER-industries, organizations, or operations The formula for incident rates is - ANSWER-# incidents x 200,000 / employee hours worked TRIR - ANSWER-Total Recordable Incident Rate DART - ANSWER-Days Away Restricted Transferred Three parts of an OSHA inspection are - ANSWER-1. Opening conference

  1. Worksite "Walk-around"
  2. Closing Conference Opening conference - ANSWER-brief meeting during which the OSHA inspector will explain the purpose of the inspection Worksite "Walk-around" - ANSWER-walk around and see if there are any inspections; might take pictures and notes during the inspection Closing conference - ANSWER-the inspector will disclose any hazards or violations identified during the course of the inspector, as well as any possible violations the organization may face; citations and fines are not discussed Only _____ companies may have a focused OSHA inspection. - ANSWER-construction When the OSHA CSHO arrives at a site to conduct a focused inspection, they will determine: - ANSWER-1. whether there is a project coordination by the general contractor
  3. review the projects safety and health program for adequacy
  4. determine if there is a competent person If the CSHO does not find that a company qualifies for a focused inspection, they will receive a _____ inspection - ANSWER-comprehensive General Duty Clause - ANSWER-shall furnish to each of his employees' employment and a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees The purpose of an OSHA compliance directive (CPL) is to insure - ANSWER-consistent enforcement of OSHA regulations the four types of and definitions of employers in a multi-employer situation are - ANSWER-1. creating employer
  5. exposing employer
  6. correcting
  1. controlling Creating Employer - ANSWER-employer that created or caused the hazard Exposing employer - ANSWER-employer whose own employees were exposed Correcting employer - ANSWER-employer responsible for correcting hazard Controlling employer - ANSWER-general supervisory authority with the power to require correction For an employer to provide a defense against a citation in a multi-employer situation, the employer must show the following: - ANSWER-1. employer did not cause the hazard to exist
  2. employer did not directly control conditions causing the hazards
  3. employer has taken reasonable steps to notify the party(s) charged with cause and control of the problem
  4. employer has taken reasonable steps to keep his/her employees away from the hazard Inspections must be done by a _____ person. - ANSWER-competent The four steps in conducting a JSA are - ANSWER-1. identify job to be examined
  5. identify steps/ tasks of job
  6. identify the hazard of each key step
  7. identify control(s) address each hazard A safety audit is __ in nature while inspections are __ - ANSWER-quantitative; qualitative An audit compares actual performance to a - ANSWER-set standard OSHA record keeping requirements are contained in 29 CFR _____, which is a horizontal standard applying to _____ companies regulated by OSHA. - ANSWER- 1904; general industry Businesses regulated by OSHA may be exempt from these standards for two reasons, _____ or _____. - ANSWER-size or industry type Companies cannot employ over _____ employees at any point during the calendar year to claim the size exemption. - ANSWER- Companies must have a ____ risk SIC or NAICS code to claim the type exemption. - ANSWER-high

TLV-C - ANSWER-Ceiling value and should never be exceeded The maximum travel distance for any point of the protected area to the nearest fire extinguisher shall not exceed __ - ANSWER-100 feet All hand and power tools, whether paid for by the employer or employee, shall be in a __ - ANSWER-safe condition with proper storage and regular maintenance Whenever practicable, all arc welding and cutting operations shall be __ to protect employees and other persons working in the vicinity. - ANSWER-shielded Failure to inspect for oil or grease on regulator fittings, valves, or the cap threads on a cylinder of oxygen can result in __ - ANSWER-fire or explosion An "Assured equipment grounding conductor program" deals with the cord-set and receptacles which are not part of the __ - ANSWER-building's permanent writing __ is the maximum voltage before guarding is required against accidental contact by cabinets, other forms of enclosures, or by location in a room or enclosure accessible only to qualified persons (electricians). - ANSWER-50 volts or greater The practice of connecting two metallic objects to prevent static sparks is called __. - ANSWER-bonding Before the start of any work covered under Subpart V - Power Transmission and Distribution, __ - ANSWER-existing conditions are determined by an inspection or a test Eye and face protection equipment used to protect against hazards shall meet the requirements specified in __________. - ANSWER- Respirators used in the construction industry are covered under OSHA standard 1910._____. - ANSWER- Accident prevention signs such as; danger, caution and exit signs shall be _______ when work is being performed. - ANSWER- A material chute used during demolition operations must be enclosed when its angle is equal to or greater than __ from the horizontal. - ANSWER-45 degrees __ is the trigger height when the masonry walls must be braced? - ANSWER-over 8 feet When a masonry wall is being constructed, a limited access zone at least the height of the wall plus a minimum of __feet tall shall be established on the side of the wall without scaffolding. - ANSWER-

Except for extra-heavy-duty metal or plastic portable ladders, all portable ladders must support __ the maximum intended load. - ANSWER-4 times Portable ladders with structural defects such as, broken or missing rungs or split rails shall be __ from service until repaired. - ANSWER-removed According to OSHA, portable containers used to provide drinking water shall be tightly __and equipped with a __. - ANSWER-

  1. ______contaminants is toxic to both male and female reproductive systems and can create significant exposures to workers removing paint from bridges, renovating residences, and demolishing or salvaging structures. - ANSWER- Rigging equipment for material handling shall be inspected prior to __ and as necessary during use. - ANSWER-use of each shift __ must have the authority to stop and refuse to handle crane loads until a qualified person has determined that safety has been assured. - ANSWER-crane operator
  2. During crane operations when signaling is required, if the signals are interrupted the crane operator should __ - ANSWER-safely stop operations requiring signals until they are __ is responsible to train signal persons to meet the 1926.1428 standard. - ANSWER- the employer
  3. The material used in rollover protection structures must have the capability of performing at __ Fahrenheit. - ANSWER-0 degrees
  4. The operator training requirements for rough-terrain industrial trucks used in the construction industry are covered under OSHA standard__ - ANSWER-1910. powered industrial trucks