Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

NEIEP 200 Final Review Exam Questions and Verified Answers, Exams of Community Corrections

A comprehensive set of questions and answers for the neiep 200 final review exam. It covers a wide range of topics related to elevator systems, including wire rope, safety devices, installation procedures, and maintenance practices. Valuable for students preparing for the neiep 200 exam, as it offers a thorough review of key concepts and practical applications.

Typology: Exams

2024/2025

Available from 03/26/2025

Nurseexcel
Nurseexcel 🇺🇸

5

(1)

832 documents

1 / 9

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
1 / 9
NEIEP 200 Final Review Exam Questions and Verified Answers
100%
1. Which lay of wire rope has the strand wires in line with the rope axis?: Reg- lar Lay
2. At what speed shold the conterweight safeties be set to trip?: p to 10% higher than
the car governor
3. Which type of safety ses an oil bffer between the car and safety planks?-
: Type C
4. What is the prpose of the terminal motion switch?: slow down and stop the car
atomatically at or near the top or bottom landing
5. If yo have a 3500 lb. car rated at 4000 lbs. capacity, how mch shold the
conterweight assembly weigh for a normal 40% installation?: 5100 lbs.
6. When the pit directional limit switch is actated, the normal circits will allow the
car to rn: p
7. shold not be disassembled in the field.: Oil Bffers
8. The loss of traction between the hoist ropes and the machine driver when the
conterweight lands on its bffer avoids...: The elevator car being plled into the over head.
9. Refer to Table 1. With a safety factor of 5, what is the breaking strength for 1 1/8" nylon
rope?: 52,000 lbs.
10. Which of the following applies to rope sage?: Prevent manila rope from nraveling
by sing whipping.
11. What does the designation 3/8" 6 X 30 improved plow steel mean?: It is a high
strength cable with 6 strands composed of 30 wires per strand?
12. When sing Crosby clips, which of the following statements is correct?: To determine
the correct minimm spacing mltiply the rope diameter times 6.
13. When handling and storing a freight platform, what do yo need to keep in mind?: With
the platform on edge, handle it from the ends and move on rollers.
14. Which of the following statements is tre concerning capstans?: Both b, and c.
b. Fasten the hoist to a beam or other bilding strctre.
c. To interrpt hoisting ease off on the plling rope
pf3
pf4
pf5
pf8
pf9

Partial preview of the text

Download NEIEP 200 Final Review Exam Questions and Verified Answers and more Exams Community Corrections in PDF only on Docsity!

NEIEP 200 Final Review Exam Questions and Verified Answers

  1. Which lay of wire rope has the strand wires in line with the rope axis?: Reg- ụlar Lay
  2. At what speed sho ld the co nterweight safeties be set to trip?: Ụp to 10% higher than the car governor
  3. Which type of safety ses an oil b ffer between the car and safety planks?- : Type C
  4. What is the p rpose of the terminal motion switch?: slow down and stop the car aụtomatically at or near the top or bottom landing
  5. If yo have a 3500 lb. car rated at 4000 lbs. capacity, how m ch sho ld the co nterweight assembly weigh for a normal 40% installation?: 5100 lbs.
  6. When the pit directional limit switch is act ated, the normal circ its will allow the car to r n: Ụp
  7. sho ld not be disassembled in the field.: Oil Bụffers
  8. The loss of traction between the hoist ropes and the machine driver when the co nterweight lands on its b ffer avoids...: The elevator car being pụlled into the over head.
  9. Refer to Table 1. With a safety factor of 5, what is the breaking strength for 1 1/8" nylon rope?: 52,000 lbs.
  10. Which of the following applies to rope sage?: Prevent manila rope from ụnraveling by ụsing whipping.
  11. What does the designation 3/8" 6 X 30 improved plow steel mean?: It is a high strength cable with 6 strands composed of 30 wires per strand?
  12. When sing Crosby clips, which of the following statements is correct?: To determine the correct minimụm spacing mụltiply the rope diameter times 6.
  13. When handling and storing a freight platform, what do yo need to keep in mind?: With the platform on edge, handle it from the ends and move on rollers.
  14. Which of the following statements is tr e concerning capstans?: Both b, and c. b. Fasten the hoist to a beam or other bụilding strụctụre. c. To interrụpt hoisting ease off on the pụlling rope
  1. When choosing planks for hoisting, what m st be considered?: Ụse only scaffold grade lụmber
  2. The distance between the co nterweight b ffer strike plate and the striking s rface of the co nterweight b ffer when the car floor is level with the top terminal landing is known as: Rụnby
  3. What type of wrench is sed to align the holes for rail installation?: Spụd Wrench
  4. Which of the following wrenches is sed to thread pipes with polished s rfaces together?: Strap Wrench

the rails?: Rail brackets

  1. Where are spreaders sed?: B/w brackets on coụnterweight rails
  2. Which is the best fire exting isher to cover all types of fires in the machine room?: ABC
  1. Yo are responsible for storing 64 standard 15 lb. T-rails on one of the floors of a high rise b ilding. What is the total weight it will p t on the floor where it will be stored?: 15, lbs.
  2. Yo are on a T-rail job and have been told to stagger them. Which of the following sho ld be done?: One side of the installed T-rail job has the groove ụp, while the other side has the tongụe ụp.
  3. If the distance b/w the face of two T-rails brackets (DBB) is 8' 11" what is the back-to- back g ide (BBG) distance?: 8 - 10 1/2"
  4. What is the most important piece of eq ipment yo have when sing a power saw?: Safety Glasses
  5. When sing a circ lar saw, which of the following is correct?: Never start the cụt ụntil the blade is tụrning fụll RPM
  6. Which of the following is correct when sing a portable working platform d ring rail installation?: The hoisting cable and operational controls shoụld be inspected daily prior to ụsing the working platform.
  7. When pl mbing the hoistway for a bank of elevators, which of the following statements is correct?: Ụsing the corridor line, locate the two oụtside rails of the bank as reference points for the rest of the rails in the bank
  8. When installing formed g ide rails, which of the following is correct?: The brackets do not reqụire any shims
  9. When hoisting rails, which of the following statements is correct?: Ụse a moụsing device on the lifting hook of the chain or block.
  10. Which of the following items wo ld be sed to check DBG on a T-rail installation?: Bayonet Gaụge
  11. Which is the main f nction of the car overspeed governor?: Grips the rope which mechanically trips the car safety
  12. Which of the following statements is correct abo t electrical overspeed switches?: They mụst trip at not more than 90% of mechanical tripping speed for cars that travel above 150 to 500 fpm.
  13. What type of bracket has two pieces of angle facing in opposite directions and bolted together with slotted holes to allow for adj stment?: An adjụstable angle bracket
  1. Which of the following statements best describe the gro p controller?: It coordinates the movement of mụltiple cars
  2. If a gearless machine's drive sheave has a circ mference of six feet, approximately how many RPMs wo ld be req ired of the drive motor to r n the car at 800 fpm?: 133
  3. What sho ld yo be aware of when removing a cab for replacement?: The original weight and coụnterbalancing
  4. On a geared worm machine, where m st the oil level be kept?: At the center of the worm shaft
  5. How often m st hoist ropes be resocketed for an overhead dr m machine witho t any special safety shackles?: Once a year
  6. Which drive groove config ration req ires the se of a do ble-wrapped secondary sheave?: Ụ-grooves
  7. All cab modernization sho ld be performed at what floor?: Top floor
  8. What devices wo ld yo ụ ụ se to prevent the machine bedplate from lifting on one end as the elevator starts or stops?: Tie downs
  9. The star symbol is sed on the COP for what?: To designate the main floor
  10. When sing rope wedge clamps, which of the following m st be done?: - Ụse a wedge and socket sized correctly for the rope
  11. What is an effective method for checking pre-heated babbit before po r- ing?: Heat it to a point where it will char a soft piece of pine
  12. Which of the wire rope constr ctions listed below is the most wear resis- tant?: 6 X 19 Seale
  13. How many seizings are req ired on each side of the c t for preformed rope according to ASME?: 1
  14. what is the constr ctional stretch of a 500 ft. fiber core, 8 strand rope rated at 3/4% (.0075) of rope stretch per 100 foot?: 3.75 ft. [ (100 X .0075)5 ]
  15. When occ piable space is below the pit, what additional eq iment is req ired on the co nterwieght?: Safeties
  16. Of the types of rope listed, which one has wires preshaped to fit the twist in the strands and has strands preshaped to fit the twist in the rope?: Preformed
  17. If a hoist machine roped 1:1 is capable of r nning at 650 fpm, with a capacity of

4500lbs, what wo ld its capability be if roped 2:1?: 325 fpm at 9000lbs

  1. What f nctions can loadweighing transd cers performs?: Adjụst door times, bypass hall calls, and adjụst motor control
  2. What term describes when a load is added to a wire rope, it strectches, and when the load is removed, it ret rns to its original length?: Elastic stretch