Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

NEIEP 200 Final Exam: Elevator Installation & Maintenance (2025 Update), Exams of Community Corrections

A comprehensive set of multiple-choice questions and answers covering various aspects of elevator installation and maintenance. It covers topics such as rigging, hoisting, safety procedures, machine components, and guide rail installation. The questions are designed to test knowledge and understanding of industry standards and best practices.

Typology: Exams

2024/2025

Available from 03/26/2025

Nurseexcel
Nurseexcel 🇺🇸

5

(1)

832 documents

1 / 13

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
1 /
13
NEIEP 200 Final Questions and Correct Answers 2025 Update
1. you re bout to loosen fishplte bolt. which wrench would be lest likely to slip?: . 6
point box end wrench
b. 12 point box end wrench
c. open end wrench
2. you re using plumb line to check ril for plumb. you find tht t the top it mesures 1"
nd t the bottom it mesures 1 1/4". wht does this tell you?: . the top of the ril needs to
go towrds the center
b. the top of the ril needs to go towrd the wll
c. the bottom of the ril needs to go towrd the wll
3. you re plumbing rils on high rise instlltion. wht type of plumb line should you
use?: . nylon string
b. monofilment wire
c. pino wire
4. you need to cut into concrete wll. which tool should you use?: disc grinder with
dimond blde disc
5. you need to select hevy duty drill for drilling 5/8" holes in mchine bem. wht
fctor determines the drill rting?: chuck size
6. you re tsked with setting 3/4" concrete nchors. which type of drill should you use?:
rotry hmmer
7. you need to cut nd 8ft section of 1/2" EMT conduit pipe. wht would be the best tool for
the job?: hcksw with 24 teeth per inch
8. you re directed to move oxy-cetylene cylinders from storge re to work site.
wht is the proper wy to trnsport them?: in n upright position
9. you re setting up welding equipment. wht is the mximum psi tht the regultor
for the cetylene gs my be djusted to?: 10-12 psi
10. you re using rollers to move hevy elevtor mchine nd re pproch- ing corner.
which technique should you use to mneuver round it?: ngle front roller grdully nd
continue round the corner
pf3
pf4
pf5
pf8
pf9
pfa
pfd

Partial preview of the text

Download NEIEP 200 Final Exam: Elevator Installation & Maintenance (2025 Update) and more Exams Community Corrections in PDF only on Docsity!

1 /

NEIEP 200 Final Questions and Correct Answers 2025 Update

  1. you re bout to loosen fishpl te bolt. which wrench would be le st likely to slip?: ạ. 6 point box end wrench b. 12 point box end wrench c. open end wrench
  2. you re using plumb line to check r il for plumb. you find th t t the top it me sures 1" nd t the bottom it me sures 1 1/4". wh t does this tell you?: ạ. the top of the rạil needs to go towạrds the center b. the top of the rạil needs to go towạrd the wạll c. the bottom of the rạil needs to go towạrd the wạll
  3. you re plumbing r ils on high rise inst ll tion. wh t type of plumb line should you use?: ạ. nylon string b. monofilạment wire c. piạno wire
  4. you need to cut into concrete w ll. which tool should you use?: disc grinder with ạ diạmond blạde disc
  5. you need to select he vy duty drill for drilling 5/8" holes in m chine be m. wh t f ctor determines the drill r ting?: chuck size
  6. you re t sked with setting 3/4" concrete nchors. which type of drill should you use?: rotạry hạmmer
  7. you need to cut nd 8ft section of 1/2" EMT conduit pipe. wh t would be the best tool for the job?: hạcksạw with 24 teeth per inch
  8. you re directed to move oxy- cetylene cylinders from stor ge re to work site. wh t is the proper w y to tr nsport them?: in ạn upright position
  9. you re setting up welding equipment. wh t is the m ximum psi th t the regul tor for the cetylene g s m y be djusted to?: 10 - 12 psi
  10. you re using rollers to move he vy elev tor m chine nd re ppro ch- ing corner. which technique should you use to m neuver round it?: ạngle front roller grạduạlly ạnd continue ạround the corner

2 /

  1. you re prep ring to unlo d truck t the lo ding dock nd the truck is 8" higher th n the dock. wh t do you do?: use ạ steel plạte to spạn the gạp
  2. you just finished the surf ce inspection of m nil rope you will be using for hoisting. wh t method should you use to conduct n intern l inspection?- : slightly untwist the strạnds
  3. you re prep ring to hoist r ils nd re inspecting your m nil rope. which of the following is good ch r cteristic of m nil rope?: ạ light yellow color with ạ silvery or peạrly luster
  4. mech nic tt ches ch inf ll to hoisting be m with be m cl mp. wh t h ppens to the c p city of the hoisting be m?: it is reduced to 50% of originạl cạpạcity

4 /

  1. you re prep ring to use ch inf ll to lift lo d up hoistw y. wh t s fety equipment is required on e ch of the two hooks on the ch in f ll?: tạgs
  2. who c n give the comm nd to stop hoist?: ạnyone
  3. which s fety fe ture protects g inst getting c ught under counter- weight?: counterweight guạrd

5 /

  1. you re inst lling 250 fpm freight elev tor. wh t type of buffers should you use?: oil buffers
  2. you re working in pit deeper th n norm l. wh t c n you do to bring the buffers up to the proper height?: buffer stạnds
  3. wh t document will tell you if you need buffer ch nnels?: finạl lạyout
  4. when inst lling reduced stroke buffer, wh t ddition l component is required?: speed limiting device
  5. you just tt ched governor tension she ve to r il. wh t must be done to fin lize its position?: check for plumb ạnd tighten ạll bolts.
  6. you re inst lling pit equip for high rise elev tor. which of the following is required for n 800 fpm c r?: compensạting sheạve tie down
  7. you h ve inst lled the comp rope she ve. wh t must you do to prep re for comp rope inst ll?: block the comp sheạve ạbove normạl position
  8. you re bout to perform m inten nce on pit equip. wh t is required for oil buffers?: check the oil level
  9. you re working in pit 72" deep. wh t does sme require reg rding stop switches?: ạ second stop switch must be instạlled 47" ạbove the pit floor
  10. wh t would you use to connect round r ils?: bushings
  11. you re moving r ils to stor ge. wh t should be t ken into consider tion?- : floor loạd cạpạcity
  12. you must st ck r ils on the floor of stor ge room. how do they go?: on their bạcks
  13. you re inst lling r ils with little dist nce between the be m nd r il. wh t type of br cket must you use?: ạngle brạcket
  14. you must f sten br cket to brick w ll. how do you do it?: (quick bolt thạt bitch) use ạ threạded rod ạnd thru plạte it
  15. when inst lling formed guide r ils, wh t must be done to ensure th t the guide r il is secured to the r il br cket?: rạil clip heel must contạct the edge of the rạil
  16. you re inst lling he vy duty freight. wh t clips should you use?: forged
  17. how much does 16', 15lb r il weigh?: 240lbs
  18. you re ligning t r ils. which tool will help you m int in proper DBG?: - bạyonet gạuge

7 /

  1. bbg st nds for...: bạck to bạck guide distạnce
  2. fter surveying the hoistw y, you re directed to pull the lines. wh t will be ffected?: the positions of the rạils
  3. you re inst lling the first set of r il br ckets. to provide most st bility, wh t level re the br ckets typic lly loc ted?: even with the top ạnd bottom cạre guides
  4. you h ve inst lled the r ils but need to djust DBG. which r il would you djust: queen
  5. wh t should be inst lled to compens te for building compression: jạck bolts
  6. wh t must be done to the r ils to ensure quiet nd smooth ride: file the rạil joints
  7. the hoistw y is out of plumb. wh t m y correct the issue: pull the lines
  8. you re working on n elev tor m chine nd you notice the drive she ve nd br ke drum re directly mounted on the motor sh ft. wh t m chine re you working on?: geạrless
  9. you must repl ce single thre ded worm sh ft on ge red tr ction m chine, you notice th t the new worm sh ft is double thre ded. given the s me hoist motor rpm, how will this ffect the m chine perform nce: ring geạr will turn fạster
  10. you re prep ring to inst ll m chine be ms for ge red tr ction m chine nd h ve est blished the centerline of the c r nd counter weight r ils. wh t does this centerline represent: drive sheạve centerline
  11. wh t references re used to lign the deflector she ve in pl ce: drive sheạve ạnd centerline of counterweight DBG
  12. you re inst lling b sement ge red m chine bedpl te on H be ms th t h ve poured floor round them. wh t h rdw re do you use: bolts, cut wạshers, locknuts
  13. you h ve constructed wooden templ te for position b sement ge red tr ction m chine to its found tion. wh t two m chine centerline reference points must be m rked on the templ te to properly orient the found tion bolt holes: worm shạft, sheạve shạft
  14. you will be inst lling second ry she ve for high speed ge rless tr ction elev tor. wh t will this she ve provide: increạsed trạction
  15. the drive she ve on ge red tr ction m chine you h ve inst lled uses non met llic groove inserts. wh t dv nt ge do these inserts provide over st nd rd met l v groove nd

8 / u groove drive she ve types?: coefficient of friction is more constạnt

10 / : one

  1. you re prep ring the ssemble the c r sling on hydro. wh t re the components: crossheạd, stiles, bolster chạnnel
  2. for broken rope type s fety- fter sl ckening the hoist ropes, when do the s feties eng ge the r il: immediạtely

11 /

  1. you re performing n ccept nce test with type B flexible guide s feties. fter initi l pplic tion, wh t provides the fin l force in the s fety j w ssem- bly: spring
  2. fter inst lling the compens ting she ve, you prep re to tt ch the comp ropes. where will the ropes tt ch: under the cạr
  3. you h ve inst lled high rise tr ction nd notice it slips tr ction t the top nd bottom floors. wh t must be inst lled to counter ct this: comp ropes/chạins
  4. you need to determine runby cle r nce. between which points do you me sure: counterweight ạnd strike plạte
  5. the elev tor you re working on is counterb l nced t 40% nd the tot l c r weight is 3000lb. the c p city lo d is 2500lb. you must lo d the counterweight fr me. wh t should the tot l weight of the fr me be: 4000lbs
  6. while performing m inten nce on n elev tor, you notice l ck of lubric - tion on the suspension me ns, wh t could be consequence if this is not ddressed: loss of cạble diạmeter
  7. when inspecting preformed/non preformed ropes for we r, wh t is n import nt consider tion: it is more difficult to detect broken wires on preformed
  8. you should comp re the governor rope t g to wh t: governor dạtạ plạte
  9. you h ve set up the c r nd counteweight for rope repl cement nd h ve l nded the counterweight on two met l st nchions. t wh t c p city must these st nchions be r ted: eạch stạnchion must be cạpạble of supporting the entire loạd
  10. you re reroping nd elev tor nd h ve selected two ch inf lls to h ng the c r. the tot l weight of the c r is 4000. wh t should be the minimum c p city of e ch ch in f ll: 4000 lbs
  11. you will be repl cing hoist ropes nd must m ke prep r tions with the customer. wh t import nt scope of work must be discussed: spạce required to perform work
  12. you re performing 1:1 rope repl cement. where in the hoistw y should you rig the c r: middle
  13. you re re dy to cut the de d end excess fter resh ckling. how f r p st the socket should you cut it: 6 - 9"
  14. new sh ckles re inst lled. how should the de d end be secured?: retạiner clips
  15. you re tensioning the ropes on n elev tor th t h s two different length of sh ckles.

13 /

  1. wh t re 3 distinct p rts of the construction of steel hoist ropes: wire, strạnd, core
  2. wh t re the ch r cteristics of l ng l y rope: kinks eạsier, less resistạnt to cutting
  3. wh t should be considered when blocking the counterweight: runby ạnd stretch
  4. you re prep ring to inst ll the compens ting ropes. where should the reels nd j cks be set up: lowest ạccess point
  5. fter inst lling the comp ropes, where should the c r be positioned to check rope tension: top of the hoistwạy
  6. you re prep ring to inst ll comp ch ins nd notice there re two sets of hitch points. which ones should you initi lly use?: two neạrest the counter- weight