Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

METAL COIL TEST QUESTIONS AND ANSWERS LATEST 2025 RATED A, Exams of Metal Structures and Mixed Construction

METAL COIL TEST QUESTIONS AND VERIFIED ANSWERS LATEST 2025 RATED A

Typology: Exams

2024/2025

Available from 07/06/2025

prof-liza
prof-liza 🇬🇧

1.1K documents

1 / 3

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
METAL COIL TEST QUESTIONS AND
VERIFIED ANSWERS LATEST 2025
RATED A
1. Direct downs provide ____ resistance to oppose the forces that are
acting on the cargo. - ANSdirect
2. The WLL is determined by the DOT. - ANSFalse.
3. Driver should inspect cargo after - ANSall of the above
4. What is the total aggregate WLL to tie down two 15' steel rolls loaded
end-to-end longitudinal to the trailer? Each weighs 14,292 lbs. - ANS28,584
5. What is the total side-to-side force restriction need for question 4? -
ANS14,292
6. What is the total vertical force needed for question 4? - ANS5,716
7. What is the required restraining force for rearward force? - ANS0.5g
8. What is the WLL for 3/8 nylon rope? - ANS278
9. The working load limit of all components used to block cargo from
forward movement must be - ANS80%
pf3

Partial preview of the text

Download METAL COIL TEST QUESTIONS AND ANSWERS LATEST 2025 RATED A and more Exams Metal Structures and Mixed Construction in PDF only on Docsity!

METAL COIL TEST QUESTIONS AND

VERIFIED ANSWERS LATEST 2025

RATED A

  1. Direct downs provide ____ resistance to oppose the forces that are acting on the cargo. - ANSdirect
  2. The WLL is determined by the DOT. - ANSFalse.
  3. Driver should inspect cargo after - ANSall of the above
  4. What is the total aggregate WLL to tie down two 15' steel rolls loaded end-to-end longitudinal to the trailer? Each weighs 14,292 lbs. - ANS28,
  5. What is the total side-to-side force restriction need for question 4? - ANS14,
  6. What is the total vertical force needed for question 4? - ANS5,
  7. What is the required restraining force for rearward force? - ANS0.5g
  8. What is the WLL for 3/8 nylon rope? - ANS
  9. The working load limit of all components used to block cargo from forward movement must be - ANS80%
  1. What is the minimum number of tie downs for an article that is 30 feet long, and weight is 1,099 lbs? - ANS
  2. An indirect tie down that is used to prevent side-to-side force must make an angle of at least ____degrees. - ANS 12.The guiding principle of the metal coil endorsement is to make the highway more safe and - ANShave less damage to cargo
  3. You should always use a friction mat. - ANSTrue 14.The minimum number of tie downs neccessary to secure a single coil with eyes vertical is - ANS
  4. The working load limit of a rub rail is - ANSzero
  5. A tie down is - ANSa cargo securement device that attaches to the anchor point of a flatbed trailer and/or van trailer.
  6. A 5/8-inch chain with a WLL of 13,000 lbs. should be marked with what strength rating? - ANS
  7. What is the WLL of a 2-inch synthetic webbing with no visible markings? - ANS910 kg