Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

Maine Motor Vehicle Inspection: Questions and Answers, Exams of Mechatronics

A comprehensive list of questions and answers related to maine motor vehicle inspection. It covers various aspects of the inspection process, including requirements for different vehicle components, inspection fees, and definitions of relevant terms. A valuable resource for individuals preparing for the maine motor vehicle inspection examination or seeking to understand the inspection process.

Typology: Exams

2024/2025

Available from 03/28/2025

Shantelle
Shantelle 🇺🇸

5

(2)

3K documents

1 / 5

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
Maine Motor Vehicle Inspection
Inspection license is valid for how many years? - 5 years
When testing brake hydraulic system there should be how much
pedal travel left? - 1/3 remaining
Pounds of force on non power brake hydraulic systems -
40-60lbs
Pounds of force on power brake hydraulic systems? - 15-
20lbs
Required tread depth for a vehicle to pass inspection? -
2/32nds of an inch
Splash guards must be on vehicles register for over -------
pounds? - 6,000 GVWR
Reject vehicle if it was manufactured after what year and does not
have a catalytic converter? - 1982 models and newer
What number AS "American Standard" trade mark should a
windshield be rated? - AS-1
What number AS "American Standard" trade mark should the side
& rear windows be rated? - AS-2
windshield tint is only allowable if it is? - Original factory
equipped
a windshield sun shield tint strip can only extend how far from top
of window - 5" from top of windshield
pf3
pf4
pf5

Partial preview of the text

Download Maine Motor Vehicle Inspection: Questions and Answers and more Exams Mechatronics in PDF only on Docsity!

Maine Motor Vehicle Inspection

Inspection license is valid for how many years? - ✔ ✔ 5 years

When testing brake hydraulic system there should be how much pedal travel left? - ✔ ✔ 1/3 remaining

Pounds of force on non power brake hydraulic systems - ✔ ✔ 40-60lbs

Pounds of force on power brake hydraulic systems? - ✔ ✔ 15- 20lbs

Required tread depth for a vehicle to pass inspection? - ✔ ✔ 2/32nds of an inch

Splash guards must be on vehicles register for over ------- pounds? - ✔ ✔ 6,000 GVWR

Reject vehicle if it was manufactured after what year and does not have a catalytic converter? - ✔ ✔ 1982 models and newer

What number AS "American Standard" trade mark should a windshield be rated? - ✔ ✔ AS-

What number AS "American Standard" trade mark should the side & rear windows be rated? - ✔ ✔ AS-

windshield tint is only allowable if it is? - ✔ ✔ Original factory equipped

a windshield sun shield tint strip can only extend how far from top of window - ✔ ✔ 5" from top of windshield

what windows are exempt from state inspection tint requirement - ✔ ✔ vehicles equipped with tinted glass on the rear side windows and rear window are exempt

Rear view mirror must give a driver a view of the road of how many feet? - ✔ ✔ 200' feet

Reject vehicle if head lamp, measured from its center, is located less than? - ✔ ✔ 22" or more than 54"above the level surface on which the vehicle stands. does bnot apply to snow plows

a vehicle with LED lighting should have at least what % of Lighting functioning - ✔ ✔ at least 50% or more should be functioning properly

rear lamps should produce sufficient light visible from a distance of how many feet? - ✔ ✔ 100'

Vehicles registered in Cumberland county must get what class of inspection? - ✔ ✔ Class E only

Stub sheets must be returned within how many days? - ✔ ✔ 30 days after issuance

Inspection stations must keep copies of stub sheets for how many years? - ✔ ✔ 2 years

Applicants must score at least ------ to pass there state inspection examination? - ✔ ✔ 70%

What does AAV stand for? - ✔ ✔ An allowable alternative vehicle as defined 29-A MRSA 2301

manufacture, a vehicle may be subjected to tests, including a gas cap pressure test, an On-Board Diagnostic test, or both. An enhanced inspection is required of a motor vehicle that is required to registered in the Cumberland County.

Scrub Line - ✔ ✔ Means horizontal plane measured between the four tire rims

Cost for class A inspection all vehicles under 10,001 lbs. - ✔ ✔ Not more than $12.

Cost of a class E inspection "Cumberland County" - ✔ ✔ Not more than $12.50 for pre 1974

$15.50 for 1974-

$18.50 for 1996 and subsequent model year

What is OEM? - ✔ ✔ Equipment originally installed on vehicle by manufacturer

What is pedal reserve? - ✔ ✔ Amount of total pedal travel left when brake pedal is depressed

Stub sheet? - ✔ ✔ Portion of a inspection sticker completed by the technician then returned to Maine state police inspection unit office

How long must an inspection station be open? - ✔ ✔ 16 hours a week

Inspection stickers must be kept where? - ✔ ✔ Under lock and key

Who can have access to inspection stickers? - ✔ ✔ Technicians & employees responsible for ordering or handling

When & who do you inform of a lost or stolen inspection sticker? - ✔ ✔ Immediately notify Maine State Inspection Unit

Maximum Frame end height 4,500lbs GVWR - ✔ ✔ 24" to 26" inches

Maximum frame end height 4,501lbs to 7,501lbs GVWR - ✔ ✔ 27" to 29" inches

Maximum frame end height 7,501 to 10,000lbs GVWR - ✔ ✔ 28" to 30" inches

Maximum frame end height 10,001lbs to 11,500lbs GVWR - ✔ ✔ 29" to 31" inches

What is GVWR range for class A inspect able vehicles - ✔ ✔ 10,000lbs or less or they may elect to inspect motor vehicles 10,001lbs to 26,000 but restricted to vehicle without air breaks

vehicles registered in Cumberland county after 1996 are subject to what tests? - ✔ ✔ Both gas cap pressure test & OBD test

If there is a mistake in the VIN on the registration what should be done? - ✔ ✔ Complete form MV141 Mail to motor vehicle