Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

IFSTA/Essentials of Fire Fighting 7th Addition - Chapter 3 Questions And Answers, Exams of Safety and Fire Engineering

With regards to local building codes, firefighters should be aware that: - ANSWER-An AHJ Can amend model building codes to meet local needs Type __ can be expected to remain structurally stable longer than other types during a fire. - ANSWER-1 When responding to a fire in a Type l construction building, firefighters should be aware that: - ANSWER-The roof may be extremely difficult to penetrate Type ll construction buildings are composed of: - ANSWER-Non-combustible materials that do not add to the fuel load In a Type lll construction building, the interior walls, columns, beams, floors, and roofs are completely or partially constructed of: - ANSWER-Wood

Typology: Exams

2023/2024

Available from 02/11/2024

BestGrades
BestGrades 🇺🇸

4.1

(25)

2.5K documents

1 / 5

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
IFSTA/Essentials of Fire Fighting 7th
Addition - Chapter 3 Questions And
Answers 100% Correct
With regards to local building codes, firefighters should be aware that: - ANSWER-An
AHJ Can amend model building codes to meet local needs
Type __ can be expected to remain structurally stable longer than other types during a
fire. - ANSWER-1
When responding to a fire in a Type l construction building, firefighters should be aware
that: - ANSWER-The roof may be extremely difficult to penetrate
Type ll construction buildings are composed of: - ANSWER-Non-combustible materials
that do not add to the fuel load
In a Type lll construction building, the interior walls, columns, beams, floors, and roofs
are completely or partially constructed of: - ANSWER-Wood
What condition often found in Type lll construction buildings is likely to negatively
influence for your behavior? - ANSWER-Void spaces between wall studs
Type lV buildings are resistant to structural collapse because of the: - ANSWER-mass
of the heavy timber structural members
Which characteristic of Type lV construction buildings can contribute to the intensity of a
fire once it starts? - ANSWER-High concentration of wood
Which construction classification includes buildings with exterior load bearing walls
composed entirely of wood and is commonly referred to as wood frame construction? -
ANSWER-Type V
Type V construction buildings may have a veneer of stucco, brick, or stone that: -
ANSWER-provides little fire protection
The most common type of factory built home that firefighters will encounter is the ___
home. - ANSWER-Mobile
What is one construction requirement of newer factory built homes that has helped to
reduce fire loss in residential facilities? - ANSWER-Gypsum board instead of wood
paneling as an interior finish
pf3
pf4
pf5

Partial preview of the text

Download IFSTA/Essentials of Fire Fighting 7th Addition - Chapter 3 Questions And Answers and more Exams Safety and Fire Engineering in PDF only on Docsity!

IFSTA/Essentials of Fire Fighting 7th

Addition - Chapter 3 Questions And

Answers 100% Correct

With regards to local building codes, firefighters should be aware that: - ANSWER-An AHJ Can amend model building codes to meet local needs Type __ can be expected to remain structurally stable longer than other types during a fire. - ANSWER- When responding to a fire in a Type l construction building, firefighters should be aware that: - ANSWER-The roof may be extremely difficult to penetrate Type ll construction buildings are composed of: - ANSWER-Non-combustible materials that do not add to the fuel load In a Type lll construction building, the interior walls, columns, beams, floors, and roofs are completely or partially constructed of: - ANSWER-Wood What condition often found in Type lll construction buildings is likely to negatively influence for your behavior? - ANSWER-Void spaces between wall studs Type lV buildings are resistant to structural collapse because of the: - ANSWER-mass of the heavy timber structural members Which characteristic of Type lV construction buildings can contribute to the intensity of a fire once it starts? - ANSWER-High concentration of wood Which construction classification includes buildings with exterior load bearing walls composed entirely of wood and is commonly referred to as wood frame construction? - ANSWER-Type V Type V construction buildings may have a veneer of stucco, brick, or stone that: - ANSWER-provides little fire protection The most common type of factory built home that firefighters will encounter is the ___ home. - ANSWER-Mobile What is one construction requirement of newer factory built homes that has helped to reduce fire loss in residential facilities? - ANSWER-Gypsum board instead of wood paneling as an interior finish

Which type of factory build homes are assembled on-site from components structured of foam insulation sandwiched between sheets of plywood? - ANSWER-Panelized homes Which safety hazard are firefighters most likely to find in the space between the ceiling in the roof? - ANSWER-Electrical wiring Floors at ground level may consist of ___ or a floor assembly made up of joists over a crawlspace. - ANSWER-A reinforced concrete slab When an unprotected opening for pipes or wiring is made through a firewall,: - ANSWER-The protection provided by the firewall is reduced or eliminated. Which type of danger do stairs present to firefighters during low visibility conditions? - ANSWER-Fall hazard Limited means of egress and limited ventilation are two reasons that fires are more dangerous in ___ than in other compartments. - ANSWER-Basements Stairs that are part of the required means of egress and are built to resist the spread of fire and smoke or known as: - ANSWER-Protected stairs In order to maintain the integrity of a protected stairwell during a fire, firefighters should:

  • ANSWER-Maintain door control Because unprotected stairs are not enclosed with fire rated construction, they: - ANSWER-May serve as a flow path for fire and smoke Firefighters working on flat roofs are likely to encounter obstacles that penetrate through the roof, including: - ANSWER-Skylights Which roof style commonly has an elevated centre along a ridge line and a roof deck that slopes down to the eaves? - ANSWER-Pitched roof A(An) ___ roof is often found on buildings that require a large open area to be converted without being supported by pillars or columns. - ANSWER-Arched Which type of roof supports our sections of lumber that are located directly under the roof decking? - ANSWER-Beams What is the purpose of a gusset plate? - ANSWER-Serve as a connection point for wood trusses When gusset plates are exposed to fire, they: - ANSWER-Fall out after the word burns away and no longer provide structural support

Which type of door is often used as a loading dock door? - ANSWER-Vertical door How can revolving doors impact fire fighting operations? - ANSWER-Prevent movement of hose or equipment into the building Which type of door consists of thin pieces of wood, glass, or louvres placed within a framed rectangular area? - ANSWER-Panel Door Which feature is often added to solid core wood doors and can make forcing the door more difficult? - ANSWER-A sheet metal layer added to increase security Building codes require that: - ANSWER-Glass doors are made from tempered glass What method is commonly used to construct metal doors? - ANSWER-Hollow core with a steel or aluminum covering What material is commonly used to construct fire doors? - ANSWER-Metal What hazard do fire doors potentially pose to firefighters? - ANSWER-Fire doors can automatically close if the fusible link meets Overhead rolling steel fire doors are commonly used to: - ANSWER-protect firewall openings in industrial occupancy's Horizontal sliding fire doors cannot be used to: - ANSWER-Protect openings and walls in the required path of egress Which type of fire door is commonly used in stairwell enclosures? - ANSWER-Swinging fire door Which window component consists of the members that form the perimeter of the window? - ANSWER-Frame Which window component is also known as glazing? - ANSWER-Glass A___ Window consists of only a frame and one glazed stationary sash. - ANSWER- Fixed Which type of window has two sashes that can move past each other in a vertical plane and is commonly used in residential occupancy's? - ANSWER-Double-hung Window What shape of window has one or two side-hinged sashes and usually opens outwards? - ANSWER-Casement window

Which type of window has one or more top-hinge, a word swinging sashes that permit the window to be open during rain? - ANSWER-Awning Window A _____ window has separate parts that swing inward or outward when opened and is designed to provide the full area of the window opening for ventilation. - ANSWER- Pivoting In order to ensure fire fighter safety in case of rapid egress, window security bars and grilles: - ANSWER-Must be removed or disabled when interior operations begin. How are rolling steel shutters often used? - ANSWER-Protect openings in an industrial firewall