ASME B&PVC sec10$u330 05-26-99 09:29:38 pd: sec10 Rev 14.04
APPENDIX AG — NONMANDATORY
GUIDE TO INFORMATION APPEARING ON
CERTIFICATE OF AUTHORIZATION
(SEE FIG. AG-1)
ITEM DESCRIPTION
①a. The name of the Manufacturer or Assembler; this description could include
“doing business as” (DBA) or an abbreviation of the name.
b. The full street address or physical location, city, state or province, country,
and zip code.
②This entry describes the scope and limitations, if any, on use of the Code
symbol stamps, as illustrated below.
RP Code Symbol Stamp
1. Manufacture of Class I reinforced plastic pressure vessels at the above
location only.
2. Manufacture of Class II reinforced plastic pressure vessels at the above
location only.
3. Manufacture of Class I and Class II reinforced plastic pressure vessels at
the above location only.
4. Manufacture of Class II reinforced plastic pressure vessels at field sites
controlled by the above location.
5. Manufacture of Class I and Class II reinforced plastic pressure vessels at
the above location and Class II reinforced plastic pressure vessels only at
field sites controlled by that location.
6. Manufacture of Class II reinforced plastic pressure vessels at the above
location only and at field sites controlled by that location.
③The date authorization was granted by the Society to use the Code symbol
stamp indicated.
④The date authorization to use the Code symbol stamp will expire.
⑤A unique Certificate number assigned by the Society.
⑥Code symbol granted by the Society, e.g., RP, reinforced plastic vessel.
⑦,⑧The signatures of the current chair and director.
210.5
A99
docsity.com
