Fitness Test
Prepared for you by the Australian College of Sport & Fitness 2013
This test is designed to test the flexibility of the lower back and hamstring
muscles. This test can be modified for elders with the use of a chair and having
them raise one leg and reach towards it.
1. This test is best completed after a substantial amount of warm up is
completed in order to ensure the best results as well as being a safety
precaution. When a warm up is involved it is critical that the same warm up is
completed each time the test is conducted.
2. To begin this test, have the client sit on the floor with both feet straight out
against a box for them to press their feet against.
3. Make sure their feet are bare, both knees are pressed down to the floor, and
their palms are facing downward.
4. Have them reach as far as they can towards their toes, or if they are really
flexible, over the box.
5. With a ruler, or some sort, record the length of which the client can reach
measuring from their toes to their finger tips.
6. Make sure that both hands are even and one is not reaching further than the
other.
7. The client is aloud some practice reaches before you record their final hold.
8. The client should not be making any jerky or quick movements while
recording.
A ruler
A box
FLEXIBILITY TEST – SIT AND REACH
Purpose
Procedure
Equipment
