Download FE Exam 2025 Complete Preparation Guide: Question Breakdown, Time Limits and more Exams Engineering in PDF only on Docsity!
FE Exam 2025 Complete Preparation Guide:
Question Breakdown, Time Limits, and Study
Strategies
Question 1: What is the primary function of a protractor? A) To draw circles B) To measure and lay out angles C) To measure length D) To draw parallel lines Rationale: The correct answer is B. The text states the correct answer is "To measure and lay out angles". Question 2: Which grade of lead pencil is best suited for layout work? A) H/2H B) 2B/3B C) 4H/5H D) HB Rationale: The correct answer is C. The text states the correct answer is 4H/5H. Question 3: Which grade of pencil is recommended for darkening lines and lettering? A) 4H/5H B) HB C) H/2H D) 6B Rationale: The correct answer is C. The text states the correct answer is H/2H.
Question 4: What are the structural components that connect a bridge to the ground at its ends called? A) Piers B) Abutments C) Beams D) Columns Rationale: The correct answer is B. The text states the correct answer is Abutment. Question 5: Which type of bridge relies on the strength and rigidity of a curved structure? A) Beam Bridge B) Suspension Bridge C) Arch Bridge D) Cable-Stayed Bridge Rationale: The correct answer is C. The text states the correct answer is Arch Bridge. Question 6: Which structural member transmits loads to columns and carries horizontal loads? A) Column B) Strut C) Beam D) Joint Rationale: The correct answer is C. The text states the correct answer is Beam. Question 7: What is the simplest type of bridge used to span the shortest distance?
C) Strut D) Joint Rationale: The correct answer is B. The text states the correct answer is Column. Question 11: What is the crushing force down the axis of a material that shortens it? A) Tension B) Shear C) Compression D) Bending Rationale: The correct answer is C. The text states the correct answer is Compression. Question 12: What is the term for a sudden impact on a structure? A) Static Load B) Dynamic Load C) Shear Force D) Bending Moment Rationale: The correct answer is B. The text states the correct answer is Dynamic Load. Question 13: What is the study of forces that cause motion on physical objects? A) Statics B) Dynamics C) Mechanics D) Strength of Materials
Rationale: The correct answer is B. The text states the correct answer is Dynamics. Question 14: What is the state at which structures can oppose external forces and transfer loads throughout? A) Equilibrium B) Stress C) Strain D) Structural Stability Rationale: The correct answer is D. The text states the correct answer is Structural Stability. Question 15: What device connects two or more structural members together? A) Beam B) Column C) Joint D) Strut Rationale: The correct answer is C. The text states the correct answer is Joint. Question 16: What are the forces that a structure must withstand called? A) Stress B) Strain C) Loads D) Moments Rationale: The correct answer is C. The text states the correct answer is Load. Question 17:
B) Mechanics C) Statics D) Strength of Materials Rationale: The correct answer is C. The text states the correct answer is Statics. Question 21: What is the arrangement of parts built to remain stable while withstanding forces? A) Machine B) System C) Structure D) Mechanism Rationale: The correct answer is C. The text states the correct answer is Structure. Question 22: What are braces that resist compression called? A) Ties B) Struts C) Columns D) Beams Rationale: The correct answer is B. The text states the correct answer is Struts. Question 23: What is the reinforced concrete shaft at the center of a building called? A) Foundation B) Central Core C) Shear Wall
D) Elevator Shaft Rationale: The correct answer is B. The text states the correct answer is central core. Question 24: What kind of process do engineers use to design and create solutions to problems? A) Scientific Method B) Trial and Error C) Engineering Design Process D) Mathematical Modeling Rationale: The correct answer is C. The text states the correct answer is engineering design process. Question 25: Which of the following are examples of scientific knowledge sometimes needed in engineering? A) Art, Literature, History B) Statics, Ohm's Law, Thermodynamics C) Accounting, Economics, Finance D) Psychology, Sociology, Anthropology Rationale: The correct answer is B. The text states the correct answer is statics, Ohm's Law, and thermodynamics. Question 26: Which of the following are examples of engineering disciplines? A) Aerospace, Manufacturing, Chemical, Materials, Electrical, Civil, Mechanical, Biotechnical, and Computer B) Biology, Chemistry, Physics, Geology C) English, Spanish, French, German D) Political Science, Law, Philosophy, Ethics
d) Blocking Correct Answer: a) Outline Rationale: The outline defines the object's fundamental form. Question 30: _________ sketches combine all the components of the final design. a) Outline b) Refined c) Visualization d) Blocking Correct Answer: b) Refined Rationale: Refined sketches show the complete and detailed design. Question 31: In sketching, a line is drawn by making a series of short, overlapping _________. a) Circles b) Curves c) Strokes d) Dots Correct Answer: c) Strokes Rationale: Strokes are short, controlled movements to create a line. Question 32: What is the purpose of the visible line? a) To show features that are not visible b) To indicate the centers of round objects
c) To indicate where an object has been cut d) To indicate the visible edges and intersections of an object Correct Answer: d) To indicate the visible edges and intersections of an object Rationale: Visible lines define the object's outlines. Question 33: What type of line is made up of a series of dashes and is used to show features that are not visible from the viewer's point of view? a) Centerline b) Cutting-Plane c) Hidden d) Section Correct Answer: c) Hidden Rationale: Hidden lines represent obscured edges. Question 34: _______ lines are parallel, inclined (45°) lines spaced approximately 1/8" (.125") apart. a) Center b) Cutting-Plane c) Hidden d) Section Correct Answer: d) Section Rationale: Section lines indicate cut surfaces. Question 35: Identify four different types of scales that are commonly used for measuring drawings. a) Architects, Engineers, Mechanical Drafters, and Metric
a) Shield b) Pad c) Brush d) Template Correct Answer: a) Shield Rationale: An erasing shield isolates the area to be erased. Question 39: What type of line is used to indicate the centers of round objects? a) Cutting-Plane lines b) Section lines c) Centerlines d) Hidden lines Correct Answer: c) Centerlines Rationale: Centerlines mark the central axis of circles and arcs. Question 40: Dimension lines generally terminate in ________ at the ends. a) Circles b) Dots c) Arrowheads d) Crosses Correct Answer: c) Arrowheads Rationale: Arrowheads indicate the extent of a dimension. Question 41:
________ lines indicate where an object has been cut to show interior features. a) Section b) Hidden c) Cutting-Plane d) Center Correct Answer: c) Cutting-Plane Rationale: Cutting-Plane lines define the location of a section view. Question 42: When sketching an inclined line, sketch up when a line inclines to the ______ and down when a line inclines to the _______. a) Left, Right b) Right, Left c) Top, Bottom d) Bottom, Top Correct Answer: b) Right, Left Rationale: This helps maintain control and accuracy. Question 43: Why is vinyl board cover sometimes attached to the working surface of a drawing board? a) To make it easier to erase b) To protect the drawing surface c) To provide a non-slip surface d) To make the board lighter Correct Answer: b) To protect the drawing surface Rationale: A vinyl cover protects the board from damage.
Rationale: A pencil pointer sharpens the pencil lead. Question 47: The best way to attach a drawing sheet to the board is to use ___________. a) Glue b) Tape c) Drafting Tape d) Clips Correct Answer: c) Drafting Tape Rationale: Drafting tape is designed for this purpose, leaving no residue. Question 48: A(n) _______________ is a small mesh pouch filled with very fine eraser particles used to collect excess graphite from a drawing surface. a) Erasing shield b) Dry cleaning pad c) Pencil pointer d) Drafting brush Correct Answer: b) Dry cleaning pad Rationale: A dry cleaning pad helps remove graphite dust. Question 49: Engineers in the ______ Discipline must understand concepts such as pneumatics, hydraulics, power transmission, gear ratios, and efficiency. a) Civil engineering b) Computer engineering c) Mechanical engineering
d) Manufacturing engineering Correct Answer: c) Mechanical engineering Rationale: Mechanical engineering deals with these mechanical systems. Question 50: _____ is the design of coordination of all aspects of the production of products a) Civil engineering b) Computer engineering c) Mechanical engineering d) manufacturing engineering Correct Answer: d) manufacturing engineering Rationale: Manufacturing engineering focuses on production processes. Question 51: which engineering disciplines is the newest a) Civil engineering b) Computer engineering c) Mechanical engineering d) Manufacturing engineering Correct Answer: b) Computer engineering Rationale: Computer engineering emerged with the development of computers. Question 52: which of the following involves the development and manipulation of products at a microscope level a) Civil engineering b) Computer engineering
b) solution creation c) testing and analysis d) final solution or output Correct Answer: b) solution creation Rationale: Solution creation involves evaluating and selecting the best idea. Question 56: which of the following is commonly used in the testing and analysis of solutions a) 3-D modeling b) Rapid prototyping c) CNC machines d) All of the above Correct Answer: d) All of the above Rationale: These tools aid in evaluating design solutions. Question 57: in the final solution or output stage, which of the following is used to communicate design solutions to customers and people who will make the product a) CAD b) Prototypes c) Renderings d) All of the above Correct Answer: d) All of the above Rationale: These methods effectively communicate the final design. Question 58: when is the engineering design process complete
a) When the product is manufactured b) When the product is sold c) Its never complete d) After testing and analysis Correct Answer: c) Its never complete Rationale: The design process is iterative and involves continuous improvement. Question 59: the _____ outlines the problem in clear terms but is not specific that is limits creativity in design a) problem statement b) constraint c) criteria d) specification Correct Answer: a) problem statement Rationale: The problem statement defines the design challenge. Question 60: a ______ is a specific condition that limits the engineering design solution a) problem statement b) constraint c) criteria d) specification Correct Answer: b) constraint Rationale: Constraints are limitations on the design. Question 61:
