FDNY G60 PRACTICE TEST 2026/2026 QUESTIONS WITH COMPLETE
SOLUTIONS
A portable fire extinguisher with a rating of is required and should be within
feet travel distance hot work area - CORRECT ANSWER 2-A:20-B:C///30
For any CNG or LPG torch operations, the first inspection shall be conducted
minutes after completion. The second inspection shall be conducted after
completion of torch operations. - CORRECT ANSWER 30 min///1 hour
Most common fuel gasses used in blowtorches are - CORRECT ANSWER
LPG (butane, propane) natural gas (methane) (either CNG or piped natural gasses)
Sprinkler system must NOT be shut off or impaired while hot work is performed -
CORRECT ANSWER Place damp cloth guards on individual sprinkler heads
The person conducting the fire watch have other duties - CORRECT ANSWER
CANNOT
For ROOFING OPERATIONS, a portable fire extinguisher with a minimum rating of
is required - CORRECT ANSWER 3-A:40-B:C
Fire watch on floors below is - CORRECT ANSWER required
The fire watch must continue for a minimum of minutes after the hot work is done -
CORRECT ANSWER 30
The fire guard or fire watch personnel must complete a signed inspection report and it
must be submitted to and retained by the person in charge of the torch operations. -
CORRECT ANSWER The report must be made available and maintained on the
premises for a minimum of 48 hours after the work is complete.
Soldering and brazing temperatures are typically - CORRECT ANSWER
840 degrees F
Oxy-acetylene generates the highest temperature which can reach up to -
CORRECT ANSWER 6000 degrees F
Gas torches can exceed and are used for burning weeds, melting ice, or
applying tar to a roof - CORRECT ANSWER 2000 degrees F
If the torch operation is to stop for a period of , the torch vale must
be closed and the gas supply to the torch must be completely shut - CORRECT
ANSWER 1 hour or more
