Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

FANUC Certification Study with Questions and Accurate Answers, Exams of Engineering

FANUC Certification Study with Questions and Accurate Answers T/F: Dual Check Safety position/Speed features do not need additional external sensors to monitor speed and position ANSWER True What is the correct way to recover from a DCS Joint Position Check alarm? ANSWER Press SHIFT + RESET and then jog away from the limit. Which of the following allows you to enable DCS Cartesian Speed Check? ANSWER *Program instruction *Setting on the DCS Cartesian Speed Check menu *System Variable setting **All of the above** The DCS OPSFTY signals are hardwired to which unit on the R-30iB Controller? ANSWER Emergency Stop Board There are two levels of DCS Code numbers Master and Local. The Local are...? ANSWER Base, Position/Speed Check, and I/O Connect If updated in Non-DCS menus, what does not need to be applied to the DCS Parameter? Hint: Consider ALL possible setup situations ANSWER Axis limits The maximum number of Cartesian Position Check Zones? ANSWER 32

Typology: Exams

2024/2025

Available from 01/03/2025

school-inspector
school-inspector 🇺🇸

2

(1)

4.5K documents

1 / 19

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
pf3
pf4
pf5
pf8
pf9
pfa
pfd
pfe
pff
pf12
pf13

Partial preview of the text

Download FANUC Certification Study with Questions and Accurate Answers and more Exams Engineering in PDF only on Docsity!

‘T/F: Dual Check Safety position/Speed features do not need additional external sensors to monitor speed and position ANSWER True What is the correct way to recover from a DCS Joint Position Check alarm’? ANSWER Press SIFT + RESET and then jog away from the limit. Which of the following allows you to enable DCS Cartesian Speed Check? ANSWER *Program instruction *Sotting on the DCS Cartesian Speed Check menu *System Variable setting **All of the above** The DCS OPSITY signals are hardwired to which unit on the R-30iB Controller? ANSWER Emergency Stop Board There are two levels of DCS Code numbers Master and Local. The Local are...? ANSWER Base, Position/Speed Check, and I/O Connect If updated in Non-DCS menus, what does not need to be applied to the DCS Parameter? [lint: Consider ALL possible setup situations ANSWER Axis limits The maximum number of Carlesian Position Check Zones? ANSWER 32