Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

EPRI INSTRUMENTATION PRACTICE TEST 2025 QUESTIONS AND VERIFIED SOLUTIONS., Exams of Advanced Education

EPRI INSTRUMENTATION PRACTICE TEST 2025 QUESTIONS AND VERIFIED SOLUTIONS| ABSOLUTE SUCCESS GUARANTEED.

Typology: Exams

2024/2025

Available from 03/03/2025

N-U-R-S-E
N-U-R-S-E 🇺🇸

2

(2)

3.3K documents

1 / 3

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
Page | 1
EPRI INSTRUMENTATION PRACTICE
TEST 2025 QUESTIONS AND VERIFIED
SOLUTIONS| ABSOLUTE SUCCESS
GUARANTEED.
1. Inductance is measured in: - correct answer - Henreys
2. How many contacts does a DPDT relay have? - correct answer - 4 or 2
sets
3. what is the best alternative to Grounding for portable tools? - correct
answer - double insulated
4. what steps should you take to prevent damaging a circuit board while
replacing it? - correct answer - Wear an electrostatic discharge strap,
don't touch the low voltage side, and have the power off?
5. what is the loop resistance for a circuit with 5 ohm, 7 ohm, & 12 ohm
resistor in parallel? - correct answer - 2.35 ohms
pf3

Partial preview of the text

Download EPRI INSTRUMENTATION PRACTICE TEST 2025 QUESTIONS AND VERIFIED SOLUTIONS. and more Exams Advanced Education in PDF only on Docsity!

EPRI INSTRUMENTATION PRACTICE

TEST 2025 QUESTIONS AND VERIFIED

SOLUTIONS| ABSOLUTE SUCCESS

GUARANTEED.

  1. Inductance is measured in: - correct answer - Henreys
  2. How many contacts does a DPDT relay have? - correct answer - 4 or 2 sets
  3. what is the best alternative to Grounding for portable tools? - correct answer - double insulated
  4. what steps should you take to prevent damaging a circuit board while replacing it? - correct answer - Wear an electrostatic discharge strap, don't touch the low voltage side, and have the power off?
  5. what is the loop resistance for a circuit with 5 ohm, 7 ohm, & 12 ohm resistor in parallel? - correct answer - 2.35 ohms
  1. what is the loop resistance for a circuit with 5 ohm, 7 ohm, and 12 ohm resistor in series? - correct answer - 24 ohms
  2. How can a 4-20mA dc signal be read by a chart recorder that requires a 1 - 5vdc input signal? - correct answer - Use a 250 ohm resistor in series
  3. Which part of a valve provides the mechanical energy for stem travel? - correct answer - The Actruator
  4. Which part of the valve becomes an integral part of the process piping? - correct answer - Valve body
  5. A level transmitter is calibrated 0-150" H2O. the output is 9 mA. what is the input? - correct answer - 46.875" H20 or 31%
  6. which part of the control loop is the signal conditioner? - correct answer - transmitter
  7. what type of meter is a coriolis meter? - correct answer - mass flow