Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

California RDA exam dental assistant exam California RDA written exam California Californi, Exams of Dentistry

California RDA exam dental assistant exam California RDA written exam California California dental assistant certification California Registered Dental Assistant exam RDA infection control questions dental infection control measures dental regulated waste management OSHA dental office training hazard communication standard dental standard precautions in dental dental handpiece spray immunization and dental practice bloodborne pathogens training dental dental hand washing protocol dental unit biofilm reduction parenteral transmission in dentistry surgical face mask dental procedure

Typology: Exams

2024/2025

Available from 06/23/2025

Prof.Humphrey
Prof.Humphrey 🇺🇸

59 documents

1 / 16

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
California RDA written exam
1 / 16
1. according to the CDC which infection control measure is considered the most critical
for reducing the transmission of microbes in the health care setting?: hand washing
2. in a dental setting the clinical supply refrigerator may be used for the preservation
of: bonding materials
3. A used dental anesthetic needle is an example of: regulated waste
4. Employees must receive training regarding hazardous chemicals at which interval?: upon
hire and whenever a new hazard is introduced
5. The OSHA Hazard Communication Standard is based on the premise that an
employee has the right to know about: chemicals in the office
6. Which set of precautions is intended to prevent exposure to all body flu- ids?: Standard
7. The majority of the spray produced by dental hand pieces consists of: saliva
8. which of the following viral infections can be prevented through immuniza- tion?:
Hepatitis B
9. According to the Occupational Safety and Health Administration (OSHAP), a bloodborne
pathogens training program should include a general explanation of: the modes of disease
transmission
10. Routine hand washing removes: most of the transient microbes and some of the resident
microbes
11. Which of the following greatly reduces or eliminates biofilm in the dental unit water
system?: properly using chemical treatments
12. which of the following modes of disease transmission best describes a human bite?:
parenteral
13. the primary reason a surgical face mask must be used during a dental procedure is
to: protect the DHCP from exposure to spatter
14. Instrument cassettes should be wrapped: after cleaning and before steriliza- tion
15. Used radiograph fixer solution is usually considered: hazardous waste
16. Which party is responsible for ensuring a Material Safety Data Sheet is available in
the work place for each hazardous material?: Employer
17. Which of the following statements most accurately defines engineering controls?:
Materials and devices that prevent employees exposure to hazardous or infectious
substances
18. When using the air water syringe during dental treatment which of the fol- lowing
personal protective equipment are recommended by the CDC?: gloves, mask, gown, and eye
protection
19. According to the Center for Disease Control and Prevention, patient-care items that
penetrate soft tissue are categorized as: critical
pf3
pf4
pf5
pf8
pf9
pfa
pfd
pfe
pff

Partial preview of the text

Download California RDA exam dental assistant exam California RDA written exam California Californi and more Exams Dentistry in PDF only on Docsity!

  1. according to the CDC which infection control measure is considered the most critical for reducing the transmission of microbes in the health care setting?: hand washing
  2. in a dental setting the clinical supply refrigerator may be used for the preservation of: bonding materials
  3. A used dental anesthetic needle is an example of: regulated waste
  4. Employees must receive training regarding hazardous chemicals at which interval?: upon hire and whenever a new hazard is introduced
  5. The OSHA Hazard Communication Standard is based on the premise that an employee has the right to know about: chemicals in the office
  6. Which set of precautions is intended to prevent exposure to all body flu- ids?: Standard
  7. The majority of the spray produced by dental hand pieces consists of: saliva
  8. which of the following viral infections can be prevented through immuniza- tion?: Hepatitis B
  9. According to the Occupational Safety and Health Administration (OSHAP), a bloodborne pathogens training program should include a general explanation of: the modes of disease transmission
  10. Routine hand washing removes: most of the transient microbes and some of the resident microbes
  11. Which of the following greatly reduces or eliminates biofilm in the dental unit water system?: properly using chemical treatments
  12. which of the following modes of disease transmission best describes a human bite?: parenteral
  13. the primary reason a surgical face mask must be used during a dental procedure is to: protect the DHCP from exposure to spatter
  14. Instrument cassettes should be wrapped: after cleaning and before steriliza- tion
  15. Used radiograph fixer solution is usually considered: hazardous waste
  16. Which party is responsible for ensuring a Material Safety Data Sheet is available in the work place for each hazardous material?: Employer
  17. Which of the following statements most accurately defines engineering controls?: Materials and devices that prevent employees exposure to hazardous or infectious substances
  18. When using the air water syringe during dental treatment which of the fol- lowing personal protective equipment are recommended by the CDC?: gloves, mask, gown, and eye protection
  19. According to the Center for Disease Control and Prevention, patient-care items that penetrate soft tissue are categorized as: critical
  1. The purpose of a holding solution is to: prevent hardening of debris and body fluids on instruments
  2. Which barrier should be removed before temporarily leaving a patient to retrieve supplies?: gloves
  3. The majority of organisms that make up dental unit waterline biofilm consists of: water bacteria
  4. Material Safety Data Sheet (MSDS) are required by OSHA'S: Hazardous Communication Standard
  5. Besides alcohol, which of the following is a common antimicrobial agent found in hand hygiene products?: Chlorohexidine
  6. The accessibility of the exposure control plan for employees is the respon- sibility of the: employer
  7. High- level disinfectants should be used: according to the manufacturer's directions
  8. Exposure of dental heathcare personnel to nitrous oxide gases can be reduced by: using a scavenger system on the nitrous oxide equipment
  9. When putting on personal protective equipment, which barrier should be put on last, just before patient care begins?: gloves
  10. To prepare for sterilization, the high-speed hand piece and reusable air-wa- ter syringe tip should be flushed with water: after each patient
  11. Who is responsible for the evaluation of hazardous chemicals?: chemicals manufacturers and importers
  12. During normal use, which of the following is the most likely hazard for a dentist using a curing light?: eye exposure to the light
  13. An exposure plan must be updated: annually and when new or modified tasks are introduced
  14. Wearing a punctured gloves during patient care may result in which type of microbial contact?: direct
  15. Work practice controls include the use of a: one-handed recapping technique
  16. Heat sterilization of extracted teeth may result in: the vaporization of mer- cury, presenting a health hazard.
  17. A person with a latent tuberculosis infection will: have a positive skin test and no symptoms of active tuberculosis
  18. Which is the minimum temperature a steam sterilizer should reach to achieve sterilization?: 121 degrees C
  19. Which of the following is an example of a clinical contract surface?: coun- tertops
  20. which of the following is recommended to minimize the occupational exposure to atmospheric nitrous oxide?: use a properly fitted nasal patient mask
  1. The primary reason a surgical face mask must be used during dental procedure is to: protect the DHCP from exposure to spatter
  2. Using traditional radiographic procedures, which of the following is con- sidered a clinical contact surface?: X-ray control panel
  3. Mechanical monitoring of the sterilization process should occur with: - every load
  4. The primary active agent in the solution used for unsaturated chemical vapor sterilization is: formaldehyde
  5. What is the proper management for work surfaces that become contami- nated with blood?: Clean and disinfect
  6. Which of the following demonstrates an appropriate fill level for a sharps container?: 3/4 full
  7. What agency regulates the registration of hospital disinfectants?: EPA
  8. Which of the following is the best environmental infection control practice for clinical contact surfaces with irregular surfaces?: Covering surface with fluid impervious barriers
  9. Routine hand washing for dental healthcare personnel includes the use of: water and plain soap
  10. A surgical mask should be changed: after every patient
  11. Which of the following steam autoclave settings and times are most effec- tive for sterilization of wrapped instruments?: 121 degrees C (250 degrees F) and 15 psi for 30 minutes
  12. According to OSHA, safety measures that should be taken when using bonding materials with potential hazards must be found in a: Material Safety Data Sheet
  13. Which of the following indicators is placed inside every package of instru- ments prior to sterilization?: Chemical
  14. Instruments with the greatest risk of transmitting infection are: critical instruments
  15. Torn gloves should be replaced: as soon as possible
  16. What are the three types of sterilization monitoring?: mechanical, chemical, and biological
  17. To reduce the risk of disease transmission in the dental office, it is recom- mended to: use disposable items whenever possible
  18. Which of the following is regulated medical waste?: Biopsy tissue
  19. Which of the following best describes the appropriate container for a biopsy specimen?: single- leak proof container with a biohazard symbol
  1. Which of the following is recommended for managing contamination of digital radiographic sensors that cannot be heat sterilized?: The use impervi- ous barriers followed by cleaning and disinfection
  2. Which of the following is the best method for managing components of dental instruments that cannot be detached from the dental unit?: cover with impervious barriers that are changed between each patient
  3. Isopropyl alochol performs best as a(n): antiseptic
  4. A dental assistant who receives an accidental exposure on the skin from a contaminated source should first: wash the exposed skin with soap and water
  5. The mechanism of disease transmission for influenza is: droplet
  6. Sterile surgical gloves sold in the United States must meet the standards of which regulatory agency?: Food and Drug Administration (FDA)
  7. Which microorganism is used to identify a disinfectant as intermediate level?: M. tuberculosis var bovis
  8. How must contaminated reusable sharp instruments be transported from the treatment area to the processing area?: In a puncture- resistant container that is leak proof on the sides and the bottom
  9. According to the CDC to reduce the contamination of cleaning solutions, reusable mops used on housekeeping surfaces should be: cleaned and dried before reuse
  10. the microbial skin flora that do not colonize and don not survive on the hands for long periods are: transient flora
  11. Solutions used for cooling and irrigating during oral surgical procedures are best delivered through: a sterile delivery device
  12. Oral surgical procedures require the use of: sterile irrigating solutions using a sterile delivery system
  13. Immunization against influenza is administered: once a year
  14. Which of the following is an example of an OSHA- required sharp with engi- neered injury protection?: a self-sheathing needle attached to a dental anesthetic syringe
  15. According to the OSHA Bloodborne Pathogens Standard protective eye- wear must have: solid side shields
  16. One of the most important sources in preventing the spread of disease is proper hygiene of one's: hands
  17. While cleaning contaminated instruments, an assistant receives a percu- taneous injury to the finger. The assistant should FIRST: wash hands with soap and water
  18. According to the CDC, how long should sterilization monitoring records be kept?: as required by state and local regulations
  1. Clinical consideration for patients with bronchial asthma should include- : shorter appointments to reduce stress
  2. Dental office appointment schedules may include blocks of time set aside for emergency patients. This time is called: buffer time
  3. A patient with which of the following medical conditions may benefit from prophylactic sublingual nitroglyerin?: Cardiovascular disorders
  4. A plastic matrix strip is used to adapt the shape of a tooth for a (an): com- posite
  5. The patient record is a permanent document of whom?: the patient
  6. Where would a patient's registration form be found in the dental office?: In the front section of the patient's chart
  7. The dental history section of a health history form provides the dental team with information regarding: previous dental care and treatment
  8. A correctly fitting impression tray has sufficient depth to leave a minimum occlusal/incisal clearance of: 2.0mm
  9. Which of the following is an adverse effect of peroxide-based tooth whitening procedures?: tissue irritation
  10. When transferring instrument with hinges such as surgical forceps and scissors, the assistant should: grasp the hinges and direct the handles to the dentist's palm
  11. When portable equipment such as curing lights and nitrous oxide ma- chines are used, in which zone of operation are they placed?: static zone
  12. Which of the following succedaneous teeth are the first to erupt?: - Mandibular incisors
  13. When a patient is referred to a specialist for treatment, the assistant should: send a copy of the pertinent information to the specialist
  14. Which of the following instruments is used for tactile discovery of decay?: explorer
  15. At the time of primary teeth exfoliation, osteoclasts first cause resorption of: root
  16. The correct sequence of dental instruments for a class I amalgam restora- tion tray based upon order of use is: excavator, condenser, burnisher, dis- coid-cleoid
  17. Which of the following materials would allow the longest working time when constructing a custom impression tray?: light- cured acrylic resin
  18. Which of the following is one sign of anaphylactic shock?: respiratory distress
  19. What instrument would be used to smooth the edges of a stainless steel crown after adjusting its height?: green stone
  1. If left untreated, plaque buildup may lead to which of the following condi- tions?: gimgivitis
  2. Proper ergonomic positioning when working from the operator's location includes: positioning the elbows close to the body
  3. To prevent alveolitis after a tooth extraction, the patient should be in- structed to: avoid drinking through a straw
  4. The process of mixing cements to a primary consistency is know as: luting
  5. If a blood pressure reading of 142/96 is obtained on an adult, it is classi- fied as: hypertension
  6. Which of the following describes the best way to remain approachable to an anxious patient?: encourage questions
  7. Fluoride- releasing restorative materials help to prevent what kind of dental caries?: recurrent
  8. The dental specialty that deals with the diagnosis and treatment of the supporting tissues is: periodontics
  9. A surgical dressing that is applied to the surgical site for protection is called a: periodontal dressing
  10. When a person's tooth is not properly aligned with its opposing tooth, it is referred to as: cross bite
  11. When a person occludes and mandibular anterior teeth cannot be seen, the diagnosis is: over bite
  12. What position(s) will the orthodontist evaluate for facial symmetry?: - frontal and profile view
  13. What type of radiograph is the most commonly exposed in orthodontics?- : Panoramic
  14. How many photographs are commonly taken in the diagnostic records appointment?: six
  15. What gypsum material is most commonly used for fabricating orthodon- tic diagnostic models?: plaster
  16. What instrument is part of the setup for seating and cementing a molar band?: bite stick
  17. The orthodontic scaler is used for: removing excess cement or bonding material
  18. To ease the placement of orthodontic bands, what procedure is complet- ed to open the contact between teeth?: Placement of a seperator
  19. When cementing bands, what material or device can be used to prevent cement from getting into the buccal tubes or attachments?: Lip balm and Utility wax
  20. How are brackets adhered to a tooth?: Bonding agent
  1. At what phase of orthodontics would a pediatric dentist intercede in getting a patient to stop sucking his or her thumb?: Preventive
  2. If you are a competitive swimmer, is it recommended that you wear a mouth guard?: No
  3. what matrices are used on primary teeth?: T-band and spot welded
  4. What endodontic procedure would be performed on primary teeth?: - pulpotomy
  5. Would a child be referred to a prosthodontist for the placement of a stainless steel crown?: NO
  6. In children, which teeth are most frequently injured?: Maxillary anterior
  7. When a tooth is avulsed, it has: come out
  8. How does the dentist stabilize a tooth after an injury?: with a temporary splint
  9. Who in the dental office is legally required to report child abuse?: All dental healthcare workers
  10. What oral conditions contraindicate the use of an ultrasonic scaler?: Pa- tients with demineralization, Narrow periodontal pockets, exposed dentin
  11. What is the more common term for dental prophylaxis?: Prophy
  12. Who can perform a dental prophylaxis?: Dentist and dental hygienist
  13. is a surgical periodontal treatment?: gingivectomy
  14. What drug is often used for the treatment of periodontitis, juvenile peri- odontitis, and rapidlt destructive periodontitis?: tetracycline
  15. When the dentist taps on a tooth, what diagnostic test is being per- formed?: Percussion
  16. What type of radiograph would be exposed through the course of root canal therapy?: periapical
  17. The diagnosis of inflamed pulp tissue is: pulpitis
  18. Another term for necrotic is: dead and nonvital
  19. is the dental material most commonly preferred for pulp capping,- : Calcium Hydroxide
  20. What portion of the pulp would the dentist remove in a pulpotomy?: Coro- nal portion
  21. Obturate means to: fill a pulpal canal
  22. The irrigation material most commonly used during root canal therapy is: diluted sodium hypochlorite
  23. The material most commonly use for filling an endodontically treated canal is: gutta percha
  24. What type of moisture control is recommended for a root canal therapy?- : dental dam
  1. What surface of the posterior tooth would the dentist enter with a rotary bur when opening a canal for root canal therapy?: occlusal
  2. is a surgical procedure that involves the removal of the apex of a root.: apicoectomy
  3. is a removable prosthesis that replaces one or several teeth.: partial
  4. How could the presence of a new prosthesis affect the flow of saliva?: in- crease
  5. Why is it important that an evenly contoured alveolar ridge affect the way a removable prosthesis fits?: for mastication and for a better fit
  6. What oral habits can affect the choice of a removable prosthesis?: clench- ing, grinding, mouth breathing
  7. What is the metal skeleton of a partial called?: framework
  8. A retainer on a partial is also called a: clasp
  9. What component of a partial controls the way it is seated in the mouth?- : rests
  10. What impression material is commonly used when one is taking a final impression for a partial?: elastomeric
  11. What dental material does the laboratory technician use to set the teeth for the try-in appointment for dentures?: wax
  12. How many teeth are in a full set of dentures?: 28
  13. What technique does the dentist use to modify the borders of an impres- sion?: border molding
  14. what is a "smile line"?: The portion of the teeth should when a patient smiles
  15. When is an immediate denture most commonly used?: After extractions of anterior teeth
  16. Who can legally fabricate and cement a provision in the dental office?: - RDA
  17. What type of provisional is the most natural looking?: custom
  18. what type of provisional could be selected for anterior teeth?: preformed polycarbonate
  19. What is required prior to the preparation of a tooth for making a custom provisional?: Preliminary impression
  20. What type of dental material is used in making a custom provisional?: - acrylic resin
  21. what is used to trim or contour a stainless steel crown?: curved crown and bridge scissors
  22. Does a polycarbonate crown remain on the prepared tooth or act as a mold for the provisional?: both
  1. Which wall of the cavity preparation is perpendicular to the long axis of the tooth?: pulpal floor
  2. where would you find a Class I restoration in the mouth?: occlusal surface
  3. How many surfaces could a Class II restoration affect?: two or three
  4. which tooth could have a class II restoration?: tooth 13
  5. what restorative material would be set up for a class IV restorative proce- dure?: composite resin
  6. What kind of moisture control is recommended for class III and IV proce- dures?: dental dam
  7. what population has a higher incidence of class I lesions?: Children
  8. What tooth surface would receive a veneer?: facial
  9. which form of gypsum is used to fabricate a die for making an indirect restoration?: high- strength stone
  10. the water/ powder ration of plaster for pouring a model is: 100/
  11. when gypsum materials are mixed, how are the powder and water incor- porated?: add powder to the water
  12. How are gypsum materials mixed?: using a spatula and rubber bowl
  13. Which of the following is part of a dental model?: Anatomic and art
  14. When pouring an impression, where would you begin placing the gypsum material in a mandibular impression?: most posterior tooth
  15. How long should you wait before you separate a model from the impres- sion?: 40 - 60 minutes
  16. Which of the two models (maxillary and mandibular) do you begin trim- ming first?: Maxillary
  17. What is the one specific area of a dental model in which the maxillary and mandibular models are trimmed differently?: anterior pattern
  18. What should be placed between the two models when they are trimmed together?: wax bite
  19. Of the three types of custom trays used in dentistry, which technique uses a volatile hazardous material?: acrylic resin
  20. What type of custom tray would be made for a vital bleaching procedure?- : thermoplastic resin
  21. Acrylic resin for the fabrication of trays is supplies as: powder and liquid
  22. What type of wax is used to form a wall around a preliminary impression when it is poured?: boxing wax
  23. To extend an impression tray, what type of waxed is use?: rope/ utility wax
  24. What type of material is used to take a patient's bite?: bite registration material
  1. What is placed to prevent a tray from seating too deeply onto the arch or quarter?: spacers
  2. Where would you commonly find the dental laboratory in a dental office?- : in a separate space away from patient care
  3. What type of specialty practice might have a more extensive laboratory?- : fixed prosthodontics and orthodontics
  4. An example of a contaminated item commonly found in the dental labo- ratory would be a (n): impression
  5. What piece of lab equipment is used to grind away plaster or stone?: - Model trimmer
  6. What piece of laboratory equipment does the dentist use to determine centric relation from a diagnostic model?: articulator
  7. What dental material is used to fabricate dental models?: gypsum
  8. hydro- means: water
  9. Another name for irreversible hydrocolloid is: alginate
  10. how is irreversible hydrocolloid mixed?: mixing bowl
  11. Elastomeric materials are selected for what type of impression?: final
  12. How are elastomeric materials supplied?: paste, cartridge, putty
  13. Which viscosity of final impression material is applied first to the teeth: - light body
  14. what does the dentist use to express light body impression material around a prepared tooth?: syringe
  15. What system accomplishes the mixing of final impression material for the assistant?: Auto-mix
  16. is most commonly used for taking a bite registration.: bite regis- tration material
  17. What tray type is most commonly selected when zinc oxide-eugenol (ZOE) bite registration paste is used?: Gauze tray
  18. Baseplate wax is prior to placement in the patient's mouth for a bite registration.: warmed
  19. A preliminary impression is prior to transport to the lab to pour up.: rinsed, disinfected, wrapped in a moist paper towel, and placed in a precaution- ary bag
  20. If increments in the powder of dental materials vary, which size is com- monly brought into the liquid first/: half of the material
  21. How do you load a crown with permanent cement?: line the interior surface.
  22. How is polycarboxylate cement liquid supplied?: tube or squeeze bottle
  23. How should polycarboxylate cement appear after the mixing process?: - Glossy
  1. With the high-speed handpiece positioned on the occlusal surface of tooth 4, where would the HVE be positioned?: lingual surface of tooth 3
  2. What can increase productivity in the dental office?: patient comfort, min- imization of stress and fatigue, delegation of expanded functions
  3. When using the clock concept for a right-handed operator, where is the static zone located?: 12 or 2 o clock
  4. According to the clock concept, instruments are to be exchanged during a procedure in the: transfer zone
  5. Besides the assistant, what else would be located in the assistant's zone?: dental unit and assistant's stool
  6. In relation to the operator, how is the assistant positioned?: 4 - 6 inches higher than the operator
  7. How should the operator maintain his or her posture when treating a patient?: upright, feet flat on the ground, elbows at the side
  8. The chairside assistant should use hand(s) in the transfer of a single instrument.: both or one
  9. What hand is use primarily to transfer instruments to a right handed dentist?: left
  10. Indirect vision could be used for viewing the: ligual of 7, facial of 25, occlusal of 3
  11. is another term for finger rest.: fulcrum
  12. Depending on the instrument, the assistant can use the of his or her left hand when retrieving a used instrument from right handed dentist.: last two fingers or middle and index finger
  13. The thickness of the lead collimator is: 1/16 inch
  14. The target in the x-ray machine housing is made of: tungsten
  15. X-rays are produced by: heating of the cathode and the anode, production of rapidly moving electrons, hot electrons bombarding a tungsten target
  16. The cells of the body least susceptible to radiation are: muscle cells
  17. California Radiological Safety Code requires the apron for patient protec- tion contain at least:: .25 mm of lead
  18. The area of the face which is most sensitive to x-ray exposure is the: lens of the eye
  19. How long according to manufacturer's directions, should etchant be left on tooth structure?: 15 - 20 seconds
  20. Caries automated detector devices can only be used on: virgin tooth struc- tures