Download AVMT 1102 Final Dawson New Exam With Questions And Correct Answers (A+) and more Exams Aviation in PDF only on Docsity!
AVMT 1102 Final Dawson New Exam With Questions
And Correct Answers (A+)
What is the maintenance recording responsibility of the person who complies with anAirworthiness Directive? - ANSWER Make a logbook entry into Aircraft Maintenance Records Where are technical descriptions of certificated engines found? - ANSWER EngineTCDS (SE)
Placards required on an aircraft are specified in what document? - ANSWER AirframeTCDS
Technical information about a specific propeller models, can be found in what? -ANSWER Propeller TCDS
What publication or publications would a mechanic use to determine the fuel quanityand octane rating for a specific aircraft? - ANSWER Airframe TCDS
FAA Airworthiness Directives are issued for what purpose? - ANSWER To correct anunsafe condition on an aircraft or model of an aircraft that is existing or could exist
Who issues Airworthiness Directives? - ANSWER FAA Suitability for use of a specific propeller with a particular engine-airplane combinationcan be determined by reference to what source? - ANSWER Airframe TCDS
What are Advisory Circulars by definition? - ANSWER Guidance for best acceptedpractices
Airworthiness Directives are amendments to what? - ANSWER Part 39 What is the definition of an STC? - ANSWER Change to the type design When are ADs issued? - ANSWER To correct an unsafe issue that is existing or couldexist
An AD has three sets of numbers, what does each set of numbers mean? - ANSWERxx-xx-xx
- First two is year issued- Second set of numbers is biweekly period of year
- Third set of numbers is number of AD issued during biweekly period Three types of AD - ANSWER - Emergency
- Notice of Proposed Rule Making (NPRM)
- Immediate What publication is used to determine whether the correct engine is installed in anaircraft? - ANSWER Aircraft's TCDS
Before a Minimum Equipment List can be obtained, the manufacturer must do what? -ANSWER Produce Master Equipment List (MEL)
What is issued by the aircraft manufacturer to correct design defects that may exist inan aircraft? - ANSWER Service Bulletin
A recurring AD would be one that... - ANSWER Is repetitive due to the nature of thecondition
What document can you use to find the datum for a specific aircraft model? - ANSWERAirframe TCDS
If the datum is located at the firewall and the prop is at station -46 and the antenna youwant to install is 195 inches from the firewall, what station is the antenna? - ANSWER +195 (AFT) Calculate CG. Main gear 128 inches AFT of the nose gear. Nose gear 12.75 inchesforward of the firewall. Firewall 2 inches aft of the datum. Left main weight 673 lbs, right main gear 671lbs, nose gear 274lbs. - ANSWER CG = 95. Calculate CG. Main gear 195 inches aft of nose gear. Nose gear 13.5 inches aft of thedatum. Left main weight 671 lbs, Right main 662 lbs, nose hear 228 lbs. - ANSWER CG =
What station is the antenna at? Firewall is the datum. Vertical stabilizer 271 inches aft ofthe firewall, antenna 52 inches forward of the vertical stabilizer. - ANSWER +219 (AFT)
What two statements that can be used when signing off a 100 hour inspection? -ANSWER - I certify that this (aircraft) has been inspected IAW a (type of) inspection and has been found to be in an airworthy condition. Next due (date).
- I certify that this (aircraft) has been inspected IAW a (type of) inspection and I signedand dated a list of discrepancies to provide to the owner/operator.
A shaft with the following measurements, diameter .450 + .009 and -.001 would havewhat minimum and maximum dimensions? - ANSWER ......
What is the F.S.D.O - ANSWER Flight Standards District Office What regulations provides airworthiness standards for an airplane certified in thenormal category? - ANSWER 14 CFR Part 23
The following words are an example of what kind of statement in an AD? "Requiredwithin the next 50 hours time-in service after the effective date of this AD, unless already accomplished." - ANSWER Compliance Under the Federal Aviation Regulations, an aviation maintenance technician is requiredto perform maintenance on an aircraft so that it is what? - ANSWER At least equal to its original or properly altered condition What type of line is normally used in a mechanical drawing or blueprint to represent anedge or object not visible to the viewer? - ANSWER Hidden Line
The measurements showing the ideal or "perfect" sizes of parts on drawings are calledwhat? - ANSWER Dimensions
Where is the record of compliance with Airworthiness Directives or manufacturers'service bulletins normally indicated? - ANSWER Aircraft maintenance records/ Logbooks If work performed on an aircraft has been done satisfactorily, the signature of anauthorized person on the maintenance records for maintenance or alterations performed constitutes what? - ANSWER Approval for return to service only for the workperformed.
During an annual inspection, if a defect is found which makes the aircraft unairworthy,the person disapproving must do what? - ANSWER Provide written notice of the defect(s) to owner/operator of aircraft When a 100-hour inspection is completed, if separate maintenance records for theairframe, powerplant(s), and propeller(s) are maintained, where is the entry for the inspection recorded? - ANSWER In each record: Airframe, Propeller, Engine For aircraft operated under part 91, when is aircraft total time required to be recordedin aircraft maintenance records? - ANSWER After satisfactorily completing inspections.
How long does the holder of a certificate issued under 14 CFR part 65 have to notify theFAA after any change in permanent mailing address? - ANSWER 30 Days
- Which FAR is Definitions and Abbreviations? - ANSWER Part What is the normal duration a mechanic certificate with airframe and/or powerplantratings? - ANSWER Lifetime unless suspended, revoked, or surrendered
- Which FAR is General Operating and Flight Rules? - ANSWER Part
- Which FAR is Repair Stations - ANSWER Part
- Which FAR is General Operating and Flight Rules? - ANSWER Part
- Which FAR is Repairmen other than crew members? - ANSWER Part
- Which FAR is Airworthiness standards for products and parts? - ANSWER Part
- Which FAR is airworthiness standards for normal and utility aircraft? - ANSWER Part
- Which FAR is Airworthiness standards for props? - ANSWER Part
- Which FAR is Airworthiness standards for powerplants? - ANSWER Part
- Which FAR is Maintenance? - ANSWER Part
- Which FAR would you find the size requirements for the N#? - ANSWER Part
Which FAR is Airworthiness Directives? - ANSWER Part 39 Which FAR is aircraft registration? - ANSWER Part 47 Which tags by color are used for condemned parts? - ANSWER Red tag Which tags by color are used for serviceable parts? - ANSWER Yellow tag Which tags by color are used for identification of parts? - ANSWER White tag Which tags by color are used for repairable parts? - ANSWER Green tag Identify the line.
- - - - - - - - - - - - - - - - ANSWER Hidden Line Identify the line. -----------------------------------------(Solid LIne) - ANSWER Visible Line
Identify the line.<------ [________] ---------> - ANSWER Extension Line
Identify the line.<-------------------------> - ANSWER Dimensions Line
What is zone 100 of an aircraft? - ANSWER Lower half of the fuselage to the rearpressure bulkhead
