Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

70-740 mcsa study dump, Exams of Computer Science

test 70-740 teste de mcsa compilado no word ..taste taste so delicius

Typology: Exams

2016/2017

Uploaded on 10/11/2017

victor-paulon
victor-paulon 🇧🇷

3.7

(3)

1 document

1 / 37

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
QUESTION 1
You have a server named Server 1 that runs Windows Server 2016 and has the
Hyper-V server role installed.
On Server1, you plan to create a virtual machine named VM1.
You need to ensure that you can start VM1 from the network.
What are two possible ways to achieve the goal? Each correct answer presents a
complete solution.
A. Create a generation 2 virtual machine.
B. Create a generation 1 virtual machine and run the Enable-
NetAdapterPackageDirect cmdlet.
C. Create a generation 1 virtual machine that has a legacy network adapter.
D. Create a generation 1 virtual machine and configure a single root I/O
virtualization (SRV-IO) interface for the network adapter.
Answer: AC
Explanation:
To boot a virtual machine from the network, it must be generation 2 VM, or
Generation 1 VM connected to legacy network adapter.
QUESTION 2
Note: This question is part of a series of questions that use the same similar
answer choices. An answer choice may be correct for more than one question in
the series. Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.
You have a Hyper-V host named Server1 that runs Windows Server 2016.
Server1 has a dynamically expanding virtual hard disk (VHD) file that is 900 GB
The VHD contains 400 GB of free space.
You need to reduce the amount of disk space used by the VHD.
What should you run?
A. the Mount-VHD cmdlet
B. the Diskpart command
C. the Set-VHD cmdlet
D. the Set-VM cmdlet
E. the Set-VMHost cmdlet
F. the Set-VMProcessor cmdlet
G. the Install-WindowsFeature cmdlet
H. the Optimize-VHD cmdlet
Answer: H
pf3
pf4
pf5
pf8
pf9
pfa
pfd
pfe
pff
pf12
pf13
pf14
pf15
pf16
pf17
pf18
pf19
pf1a
pf1b
pf1c
pf1d
pf1e
pf1f
pf20
pf21
pf22
pf23
pf24
pf25

Partial preview of the text

Download 70-740 mcsa study dump and more Exams Computer Science in PDF only on Docsity!

QUESTION 1

You have a server named Server 1 that runs Windows Server 2016 and has the Hyper-V server role installed. On Server1, you plan to create a virtual machine named VM1. You need to ensure that you can start VM1 from the network. What are two possible ways to achieve the goal? Each correct answer presents a complete solution.

A. Create a generation 2 virtual machine. B. Create a generation 1 virtual machine and run the Enable- NetAdapterPackageDirect cmdlet. C. Create a generation 1 virtual machine that has a legacy network adapter. D. Create a generation 1 virtual machine and configure a single root I/O virtualization (SRV-IO) interface for the network adapter.

Answer: AC Explanation: To boot a virtual machine from the network, it must be generation 2 VM, or Generation 1 VM connected to legacy network adapter.

QUESTION 2

Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has a dynamically expanding virtual hard disk (VHD) file that is 900 GB The VHD contains 400 GB of free space. You need to reduce the amount of disk space used by the VHD. What should you run?

A. the Mount-VHD cmdlet B. the Diskpart command C. the Set-VHD cmdlet D. the Set-VM cmdlet E. the Set-VMHost cmdlet F. the Set-VMProcessor cmdlet G. the Install-WindowsFeature cmdlet H. the Optimize-VHD cmdlet

Answer: H

QUESTION 3

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.

Your network contains an Active Directory forest. You install Windows Server 2016 on 10 virtual machines. You need to deploy the Web Server (IIS) server role identically to the virtual machines. Solution: You use Windows PowefShell Desired State Configuration (DSC) to create a default configuration and then you apply the configuration the virtual machines. Does this meet the goal?

A. Yes B. No

Answer: A

QUESTION 4

You have a Nano Server named Nano1. Which cmdlet should you use to identify whether the DNS Server role is installed on Nano1?

A. Find-NanoServerPackage B. Get-Package C. Find-Package D. Get-WindowsOptionalFeature

Answer: B

QUESTION 5

In this section, you’ll see one or more sets of questions with the same scenario and problem. Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem. Once you answer a question in this section, you will NOT be able to return to it. As a result. these questions will not appear in the review screen Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

You are a server administrator at a company named Contoso, Ltd. Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.

All of the virtual switches are of the external type. You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network. Solution: You implement a Hyper-V Replica between Host2 and Host4. Does this meet the goal?

A. Yes B. No

Answer: B Explanation: To meet the goal, you must use Live Migration. HyperV replica will cause the host to disconnect from the network. To use Live Migration, hosts must be connected to the same VSwitch and have the same brand of processor.

QUESTION 8

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have two servers that run Windows Server 2016. You plan to create a Network load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned NLB configuration. Solution: You configure the network cards to be on the same subnet and lo have dynamic IP addresses. You configure the cluster to use multicast. Does this meet the goal?

A. Yes B. No

Answer: B Explanation: To use Network Load Balancing, dynamic IP(DHCP) is not supported. IP must be statically assigned. All hosts must be configured to use unicast or multicast, but not both. All hosts must also be on the same subnet.

QUESTION 9

You have a server named Server1 that runs Windows Server 2016. You need to configure Server1 as a multitenant RAS Gateway. What should you install on Server1?

A. the Network Policy and Access Services server role B. the Remote Access server rote C. the Data Center Bridging feature D. the Network Controller server role

Answer: B

QUESTION 10

In this section, you’ll see one or more sets of questions with the same scenario and problem. Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem. Once you answer a question in this section, you will NOT be able to return to it. As a result. these questions will not appear in the review screen Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server

All domain controllers run Windows Server 2012 R2. Contoso com has the following configuration:

You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration. You need to configure Active Directory to support the planned deployment. Solution: You raise the forest functional level to Windows Server 2012 R2. Does this meet the goal?

Answer: C

QUESTION 13

You have a Windows Server 2016 Hyper-V failover cluster that contains two nodes named Node1 and Node2. On Node1, you create a virtual machine named VM01 by using Hyper-V Manage. You need to configure VM01 to move to Node2 automatically if Node1 becomes unavailable. What should you do?

A. From Failover Cluster manager, run the configure Role actions. B. From Hyper-V Manager, click VM01 and click Enable Replication. C. From Hyper-V Manager Click Node 1 and the modify the hyper-V settings. D. From Windows Powershell, run the Enable-VMReplication cmdlet.

Answer: A Explanation: Automatic failover in a cluster is configured from Failover Cluser Manager.

QUESTION 14

You have a server named Served that runs Windows Server 2016. Server1 will be used as a VPN server. You need to configure Server1 to support VPN Reconnect. Which VPN protocol should you use?

A. PPTP

B. L2TP

C. SSTP

D. lKEv

Answer: D

QUESTION 15

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.

You have a server named Server1 that runs Windows Server 2016. Server1 hosts a line-of- business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory. You need to log an event in the Application event log whenever App1 consume more than 4 GB of memory.

Solution: You create a system configuration information data collector. Does this meet the goal?

A. Yes B. No

Answer: B

QUESTION 16

You have a server named Server1 that runs Windows Server 2016. You install the Docker daemon on Server1. You need to configure the Docker daemon to accept connections only on TCP port

What should you do?

A. Run theNew-NetFirewallRulecmdlet B. Run theSet-ServiceWindows PowerShell cmdlet. C. Edit the daemon.json file. D. Edit the configuration json file

Answer: C

QUESTION 17

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, yon will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have two servers that run Windows Server 2016. You plan to create a Network Load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned NLB configuration. Solution: You configure the network cards to be on the same subnet and to have static IP addresses. You configure the cluster to use unicast. Does this meet the goal?

A. Yes B. No

D. the configurehyperv.exe command E. the Disk Management console F. the Failover Cluster Manager console G. the Hyper-V Manager console H. the Server Manager Desktop app

Answer: F

QUESTION 20

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You are a server administrator at a company named Contoso, Ltd. Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.

All of the virtual switches are of the external type. You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network. Solution: You implement live migration by using Host1 and Host2. Does this meet the goat?

A. Yes B. No

Answer: B

QUESTION 21

You have an Active Directory domain named Contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server

You install the Remote Access server role on Server1. You install the Network Policy and Access Services server role on Server2. You need to configure Server1 to use Server2 as a RADIUS server. What should you do?

A. From Routing and Remote Access, configure the authentication provider. B. From the Connection Manager Administration Kit, create a Connection Manager profile C. From Server Manager, create an Access Policy. D. From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account.

Answer: A

QUESTION 22

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Start of Repeated Scenario: Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10. The domain contains nine servers that are configured as shown in the following table.

The virtual machines are configured as follows:

  • Each virtual machine has one virtual network adapter
  • VM1 and VM2 are part of a Network Load Balancing (NIB) cluster.
  • All of the servers on the network can communicate with all of the virtual machines.

End of repeated Scenario.

On server4, you plan to provision a new volume that will be used to create large, fixed-size VHDX files. Which type of file system should you use the new volume to minimize the amount of time required to create the VHDX files?

A. ReFS B. NTFS C. CVFS D. exFAT

Start of Repeated Scenario: Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10. The domain contains nine servers that are configured as shown in the following table.

The virtual machines are configured as follows:

  • Each virtual machine has one virtual network adapter.
  • VM1 and VM2 are part of a Network Load Balancing (NIB) cluster.
  • All of the servers on the network can communicate with all of the virtual machines.

End of repeated Scenario.

You need to minimize the likelihood that a virtual machine running malicious code will consume excessive resources on Server5. What should you do?

A. Configure the virtual machines as shielded virtual machines. B. Run the Set-VMProcessor cmdlet and specify the - EnableHostResourceProtection Parameter. C. Run the Set-VMProcessor cmdlet and specify the - MaximumCountPerNumaNode Parameter. D. Configure VM Network Adapter Isolation.

Answer: B Explanation: Enable Set-VMProcessor with EnableHostResourceProtection to prevent an a virtual machine from consuming excessive resources on its host.

QUESTION 26

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.

Your network contains an Active Directory forest. You install Windows Server 2016 on 10 virtual machines.

You need to deploy the Web Server (IIS) server role identically to the virtual machines. Solution: You create a software installation package, and then you publish the package to the virtual machines by using a Group Policy object (GPO) Does this meet the goal?

A. Yes B. No

Answer: B

QUESTION 27

You have an application named App1 App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment. You need to ensure that the traffic is distributed evenly among the virtual machines that host App1. What should you include in the environment?

A. Network Controller and Windows Server Network Load Balancing (NLB) nodes B. Network Controller and Windows Server Software Load Balancing (SLB) nodes C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes D. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes

Answer: D

QUESTION 28

In this section, you’ll see one or more sets of questions with the same scenario and problem. Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem. Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10. On Server1, you have the following zone configuration.

A. Hyper-V Manager B. Failover Cluster Manager C. Server Manager D. Resource Monitor

Answer: B

QUESTION 31

Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question

You have a two-node Hyper-V cluster named Cluster1 at a primary location and a stand- alone Hyper-V host named Server1 at a secondary location. A virtual machine named VM1 runs on Cluster1. You configure a Hyper-V Replica of VM1 to Server1. You need to perform a Test Fai lover of VM1. Which tool should you use?

A. the clussvc.exe command B. the cluster.exe command C. the Computer Management console D. the configurehyperv.exe command E. the Disk Management console F. the Failover Cluster Manager console G. the Hyper-V Manager console H. the Server Manager Desktop app

Answer: G

QUESTION 32

Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2016. All of the offices are connected by high speed, low latency WAN links. You need to ensure that you can use QoS policies for Live Migration traffic between the offices. Which component should you install?

A. the Multipath I/O feature B. the Routing role service C. the Network Controller server role D. the Canary Network Diagnostics feature E. the Data Center Bridging feature

Answer: CE

QUESTION 33

Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server contains a virtual machine named VM1. You need to ensure that you can use nested virtualization on VM1. What should you run on Server1?

A. the Mount-VHD cmdlet B. the Diskpart command C. the Set-VHD cmdlet D. the Set-VM cmdlet E. the Set-VMHost cmdlet F. the Set-VMProcessor cmdlet G. the Install-WindowsFeature cmdlet H. the Optimize-VHD cmdlet

Answer: F

QUESTION 34

Your network contains a new Active Directory domain named contoso.com. You have a security policy that states that new servers should run Nano Server whenever possible. Which server role can be deployed on a Nano Server?

A. Active Directory Domain Services B. DHCP Server C. Network Policy and Access Services D. Web Server (IIS)

Answer: D Explanation: A nano server cannot be ADDS, NPAS, or DHCP server. Recommended role is IIS Web Server.

QUESTION 35

You have a Hyper-V host that runs Windows Server 2016. The host contains a virtual machine named VM1. VM1 has resource metering enabled.

A. the dns.exe command B. the optionalfcaturcs.exe command C. the Install-Package cmdlet D. the Enable-WindowsOptionalFeature cmdlet

Answer: D Explanation: Enable-WindowsOptionalFeature is used to add DNS role to a Nano Server.

QUESTION 38

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that have the same hardware configuration. You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?

A. RunNew-SRPartnershipand specify the -RephcationModeparameter. B. install the Failover Clustering feature and create a new cluster resource group. C. Install the Failover Clustering feature and use Cluster Shared Volumes (CSV). D. RunSet-DfsrServiceConfigurationand specify the -RPCPortparameter

Answer: A

QUESTION 39

You have a Nano Server named Nano1. You deploy several containers to Nano1 that use an image named Image1. You need to deploy a new container to Nano1 that uses Image1. What should you run?

A. the Install-NanoServerPackage cmdlet B. theInstall-WindowsFeaturecmdlet C. the docker load command D. the docker run command

Answer: D

QUESTION 40

You deploy a Hyper-V server named Served in an isolated test environment. The test environment is prevented from accessing the Internet. Server1 runs the Datacenter edition of Windows Server 2016. You plan to deploy the following guest virtual machines on the server.

Which activation model should you use for the virtual machines?

A. Multiple Activation Key (MAK) B. Automatic Virtual Machine Activation (AVMA) C. Original Equipment Manufacturer (OEM) key D. Key Management Service (KMS)

Answer: B

QUESTION 41

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.

Your network contains an Active Directory forest. You install Windows Server 2016 on 10 virtual machines. You need to deploy the Web Server (IIS) server role identically to the virtual machines. Solution: From a Group policy object (GPO), you create an application control policy, and then you apply the policy to the virtual machines. Does this meet the goal?

A. Yes B. No

Answer: B Explanation: An application control policy is used to allow/disallow certain programs from running on a client, not for configuring roles.

QUESTION 42

You have a server named Server 1 thai runs Windows Server 2016. Server 1 has Internet connectivity. You have a Nano Server image. You need to download and save a Nano Server package in the Nano Server image. The package is NOT included in the Windows Server 2016 installation media. Which two cmdlets should you run on Server1.

A. Set-PaekageSource B. Install-PackageProvider